Proceedings of the 13th World Conference on Titanium : sponsored by Titanium Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held August 16-20, 2015, Manchester Grand Hyatt, San Diego, California, USA /

Detalles Bibliográficos
Clasificación:Libro Electrónico
Autores Corporativos: World Conference on Titanium San Diego, Calif., Minerals, Metals and Materials Society. Titanium Committee (sponsoring body.)
Otros Autores: Venkatesh, Vasisht (Editor ), Pilchak, Adam L., 1983- (Editor ), Allison, John E. (Editor ), Ankem, S. (Sreeramamurthy) (Editor ), Boyer, Rodney (Editor ), Christodoulou, Julie (Editor ), Fraser, H. L. (Hamish L.) (Editor ), Imam, M. Ashraf (Editor ), Kosaka, Yoji (Editor ), Rack, H. J. (Henry J.) (Editor ), Chatterjee, Amit (Editor ), Woodfield, Andy (Editor )
Formato: Electrónico Congresos, conferencias eBook
Idioma:Inglés
Publicado: Hoboken, New Jersey : Wiley, 2016.
Temas:
Titanium > Congresses.
Titane > Congrès.
TECHNOLOGY & ENGINEERING > Engineering (General)
TECHNOLOGY & ENGINEERING > Reference.
Titanium.
Conference papers and proceedings.
Acceso en línea:Texto completo
Tabla de Contenidos:
  • rdin, Tony Montesin, Elise Deloye, Jeþro^me Peultier
  • Poster Session. The Effect of Graphene Monolayer on Structural, Mechanical and Corrosion Properties of Multi-Coating System, Based on SiN Thin Film, Deposited on Ti6Al4V Alloy Surface / Malgorzata Kalisz, Marcin Grobelny, Mariusz Zdrojek, Michal Swiniarski, Jaroslaw Judek
  • ICME
  • Integrated Computational Materials Engineering. Progress in the Advanced Titanium Microstructure and Modeling Program / MG Glavicic, T Morton, T Broderick, V Venkatesh, F Zhang, D Boyce, W Wu, AA Salem, I Dempster, V Saraf, Y Kosaka, A Pilchak, C Woodward, SL Semiatin
  • Prediction of Tensile Properties of Beta-Forged Ti-6246 Engine Compressor Disks / Falko Heutling, Dietmar Helm, Markus Bu·scher, Thomas Witulski, Mauricio Lopez Santaella, Doris Eggermann, Martin Franzke
  • Microstructure Uncertainty Propagation in Sheet Metal Forming Fe-Simulations: Springback of Commercial-Purity Titanium / AA Salem, JB Shaffer, SR Niezgoda, DP Satko, SR Kalidindi, A Buijk, SL Semiatin, AL Pil chak
  • Nonlocal Crystal Plasticity Finite Element Simulations of Nanoindentation on Ti-6Al-4V Alloy / Fengbo Han, Bin Tang, Hongchao Kou, Jinshan Li, Wei Wu, Yong Feng
  • Grain Boundary-Mediated Lattice Reorientation in -Titanium to Promote Plastic Deformation in Hard-Oriented Grains / Hao Wang, Gang Zhou, Jianke Qiu, Lihua Ye, Dongsheng Xu, Jiafeng Lei, David Rugg, Aijun Huang, Rui Yang
  • Porosity Formation in Laser Welded Ti-6Al-4V Alloy: Modelling and Validation / Chinnapat Panwisawas, Bama Perumal, Yogesh Sovani, Richard P Turner, R Mark Ward, Jeffery W Brooks, Hector C Basoalto
  • First-principles investigation of solute diffusion mechanisms in alpha-Ti / Lucia Scotti, Alessandro Mottura
  • ICME II. Icme of Microtexture Evolution in Dual Phase Titanium Alloys / V Venkatesh, S Tamirisa, J Sartkulvanich, K Calvert, I Dempster, V Saraf, AA Salem, S Rokhlin, T Broderick, MG Glavicic, T Morton, R Shankar, A Pilchak
  • Synthetic Building and Targeted Analysis of Life-Limiting Microtextured Regions / Joseph C Tucker, Michael A Groeber, S Lee Semiatin, Adam L Pilchak
  • Alloying Effects of Transition Metals on Beta Phase Stability of Ti Alloys from First-Principles Calculations / Tokuteru Uesugi, Syo Myamae, Yorinobu Takigawa, Kenji Higashi
  • Grain Growth Simulation in Commercially Pure Titanium Using Phase-Field Method / Tomoyuki Kitaura, Akira Seki, K Takahashi, Hideki Fujii
  • Heterogenous Nucleation During ß? a + ß Transformation in Titanium Alloys / Rongpei Shi, Yufeng Zheng, Dong Wang, Hamish Fraser, Y Wang
  • Calphad Modeling and Experimental Validation of Multi-component Systems for Cast Titanium Alloy Development / Zhi Liang, Weihua Sun, Alan A Luo, James C Williams, Anil K Sachdev
  • Advanced Microtexture Analysis of A Ti 10-2-3 Product for Better Understanding of Local Variations in Mechanical Behavior / M R Chini, L Germain, N Gey, S Andrieu, T Duval
  • Author Index: Proceedings of the 13th World Conference on Titanium
  • Subject Index: Proceedings of the 13th World Conference on Titanium.
  • / Suresh Divi, James Grauman
  • Corrosion Behavior of Ti6Al4V Fabricated by Direct Metal Laser Sintering / Yangzi Xu, Kristin L Sundberg, Richard D Sisson
  • Environmental Behavior II. Combination Of Al-Enrichment and Fluorination to Enhance the Environmental Stability of Ti-Alloys at Elevated Temperatures / Alexander Donchev, Mathias Galetz, Michael Schu·tze, Andreas Kolitsch, Rossen Yankov
  • Crack Initiation and Propagation in Ti-6Al-4V Alpha-Case / Graham Richards, Brad Wynne, Mark Dixon, Martin Jackson
  • On the Influence of Compositional Variations on the Oxidation Performance and Oxygen-Induced Phase Transformations in Ti-Based Systems / P Samimi, I Ghamarian, D Brice, MJ Kaufman, P C Collins
  • Aerospace Applications. Direct Manufacturing Processes for Structural Parts and Engines Design in Aeronautics / D Cornu, A Lenain, R Salapete
  • Timetal® 575: A Novel High Strength Forgeable a/ß Titanium Alloy / Matthew Thomas, Jon Hewitt, Martin Bache, Roger Thomas, Paul Garratt, Yoji Kosaka
  • Ti575: A New Timet Alloy for Structural Parts in Aeronautics / S Andrieu, I von Thu·ngen, A Lenain, Y Millet
  • Effect of Thermomechanical Treatments on the Strength of New Low-Cost Beta-Type Ti-Alloy / Mohamed Abdel-Hady Gepreel, Mitsuo Niinomi
  • Microstructure and Mechanical Properties of Ti-6Al-4V Laser Welds for Airplane Floor Manufacturing Application / Maxime El Kandaoui, Fabrice Scandella, Lionel Germain, Pascal Brandy, David Debreyer, Ceþdric Geþrardin, Eþric Fleury
  • Constitutive Equations to Predict Stress-Strain Behaviour for a ß Titanium Alloy at High Strain Rates Over a Wide Range of Temperatures / Hongyi Zhan, Gui Wang, Damon Kent, Matthew Dargusch
  • Aerospace Applications II. Superplastic Behavior in Fine Grain Ti-6Al-2Sn-4Zr-2Mo Sheet / Fusheng Sun, Ernie Crist, K O(Oscar) Yu
  • The Use of Infra-Red Heater in Superplastic Forming: A Way Of Saving Costs / LE Fournier Marion, Nazaret Fabien, Barrau Olivier, Lebard Etienne, Vidal Vanessa
  • Shape Memory Behavior of Superplastic Ti-4.5Al-3V-2Fe-2Mo Alloy / Hirobumi Tobe, Eiichi Sato
  • Probability of Life-Limiting Fatigue Failures in Titanium Alloys / Sushant Jha, Adam Pilchak, Christopher Szczepanski, Vikas Sinha, Reji John, James Larsen
  • Influence of Surface Integrity on Fatigue Limit: Ti-10V-2Fe-3Al Titanium Application / Steþphane Dufrenoy, Brigitte Bacroix, Thierry Chauveau, Isabelle Lemaire, Nicolas Guillemot, Gilles Thomas
  • Stability of Residual Stresses in Ti-6Al-4V Components Due to Mechanical Loads / Aleksandar Stanojevic, Hermann Maderbacher, Paul Angerer, Bernd Oberwinkler
  • Evaluation Via XRD of Residual Stresses Due to Mechanical Treatment of Ti5553 Alloy / B Voillot, F Hild, JL Lebrun, R Billardon
  • Aerospace Applications III. Evaluation of Titanium Alloys After High Temperature Air Exposure / Kayla Calvert, Yoji Kosaka
  • Effect of the oxygen diffusion on the mechanical behavior of Ti-6Al-2Sn-4Zr-2Mo-0.1Si Alloy / Jean Baillieux, Claude Archambeau, Philipe Emile, Dominique Poquillon
  • Evaluation of the Bulk and Alpha-Case Layer Properties in Ti-6Al-4V at Micro-And Nano-Metric Length Scale / Birhan Sefer, Joan Josep Roa, Antonio Mateo, Robert Pederson, Marta-Lena Antti
  • The Effect of Elevated Temperature Exposure on the Mechanical Properties of Ti834 / P Davies, R Thomas, P Garratt, N Green, M Coleman, S Birosca
  • Diffusion Bonding of Similar and Dissimilar Titanium Alloys / Phani P Gudipati, Yoji Kosaka
  • Initiation of Adhesive Wear During Frictional Interaction at Very High Velocity for a Ti6Al4V Tribopair / Guillaume Chassaing, Arnaud Pougis, Sylvain Philippon, Paul Lipinski, Jean Meriaux, Laurent Faure
  • How the Sub-Surface Microstructure of a Ti6Al4V Tribopair Evolves Due to Dry Friction at High Sliding Velocity / Guillaume Chassaing, Nathalie Gey, Albert Tidu, Laurent Faure, Jean Meþriaux
  • Linking Machining Response of Titanium Billet to Upstream Thermomechanical Processing / Pete Crawforth, Martin Jackson, Sam Turner, Bradley P Wynne
  • Biomedical and Healthcare Applications. Development of Biomedical Titanium Alloys with a Focus on Controlling Young's Modulus / Mitsuo Niinomi, Masaaki Nakai, Huihong Liu, Ken Cho
  • New, Aluminum- and Vandium-Free Titanium Alloys for Osteosynthesis Applications / C Siemers, D Wolter, H Sibum
  • Biocompatibility of New Low-Cost Ti-Alloys / Mohamed Abdel-Hady Gepreel, Sengo Kobayashi, Yasser M Abd-elrhman
  • Ti-Nb-Ta-Zr Alloys with Iron, Silicon and and Oxygen Content: Increasing Strength of Load-Bearing Implants Material / Josef Straþskyþ, Petr Harcuba, Mchal Landa, Mlos? Janecek
  • New Powder/Solid Composite Exhibiting Low Young'S Modulus and Energy Absorption for Biomedical Applications Fabricated by Additive Manufacturing / Takayoshi Nakano, Naoko Ikeo, Takuya Ishimoto, Toru Inoue
  • A ß-Type Titanium Alloy With Significantly Changeable Young'S Modulus and Good Mechanical Properties Used for Spinal Fixation Applications / Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Kengo Narita
  • Fabrication of Biocompatible Ti-Nb-Sn Through Powder Metallurgy Route for Orthopedic Implants / Rajamallu K, Manish K Niranjan, Bhupendra Sharma, Sanjay Kumar Vajpai, Kei Ameyama, Suhash R Dey
  • Shape Memory Behavior of Ti-Au-Cr Biomedical Alloy / Hideki Hosoda, Takuya Ishigaki, Yuri Shinohara, Tomonari Inamura, Kenji Goto, Shuichi Miyazaki
  • Biomedical and Healthcare Applications II. Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application / Claudia Ramskogler, Sepideh Mostofi, Fernando Warchomicka, Annelie Weinberg, Christof Sommitsch
  • Wear Behaviors of Combinations Comprised of Titanium Alloys in Air and Ringer'S Solution / Masaaki Nakai, Mitsuo Niinomi, Kengo Narita, Ken Cho, Huihong Liu, Yoon-Seok Lee
  • Formation of the Hydroxyapatite Layer on Commercially Pure Titanium Using Fine Particle Peening / Shoichi Kikuchi, Sho Yoshida, Yuki Nakamura, Koichiro Nambu
  • Formation and Evaluation of Thermally-Oxidized Titania Layers on Commercially Pure Ti / Takayuki Narushima, Nobuyuki Umetsu, Takatoshi Ueda, Shota Sado, Kyosuke Ueda
  • Effect of Fine Particle Peening Using Hydroxyapatite Shot Particles on Fatigue Properties of Beta Titanium Alloy in Rotating Bending / Yuki Nakamura, Masaya Ohtani, Toshihiro Shimizu, Shoichi Kikuchi, Koichiro Nambu
  • Formation of Hydrophilic and Hydrophobic Ti Surface Using Hydroprocessing and their Osteoconductivity / Kensuke Kuroda, Masazumi Okido
  • Fatigue Behavior of Ticp with Surface Modified by Tio Nanotubes Formation / Nilson T C Oliveira, Leonardo C Campanelli, Carolina C Bortolan, Claudemiro Bolfarini
  • In Situ Titanium Alloy Elaborated by Selective Laser Melting of Ti and Nb Mixed Powder / M Fischer, D Joguet, L Peltier, P Laheurte
  • Development of New Ti-Mn-Mo Alloys for Use in Biomedical Applications / Pedro Santos, Mtsuo Niinomi, Ken Cho, Masaaki Nakai, Huihong Liu
  • Phase Constitution and Mechanical Properties of Ti-Mo-Sn-Zr Shape Memory Alloys / Kazuki Endoh, Masaki Tahara, Tomonari Inamura, Hee Young Kim, Shuichi Myazaki, Hideki Hosoda
  • Biomedical and Healthcare Applications III. Cleanliness and Microstructural Issues Related to Additive Layer Manufactured Porous Surface Structured Titanium Medical and Dental Implants / Julius Bonini, Kaitlyn Calaluca Mazza, Joan Morra
  • Mechanical and Surface Functionalities of Nanostructured ß--Type Titanium Alloys Through Severe Plastic Deformation / Hakan Yilmazer, Mtsuo Niinomi, Ken Cho, Masaaki Nakai, Huihoung Lui, Yoshikazu Todaka, Burak Dikici, Mustafa Sıen, Hitoshi Shiku, Tomokazu Matsue
  • The Applicability of Severe Plastic Deformation in Enhancing Shape Memory Transformations in Aged Ti-50.6 at%Ni / R Shirley, HJ Rack
  • Improving in Fatigue Strength of Biomedical Ti-15Mo Alloy While Retaining Low Elastic Modulus Through Severe Plastic Deformation / IP Semenova, SA Gatina, VS Zhernakov, M Janecek
  • Investigation of Mechanical Twinning in The Ti-24Nb-4Zr-8Sn P Titanium Alloy / Philippe Castany, Yang Yang, Emmanuel Bertrand, Marilyne Cornen, Thierry Gloriant
  • Effect of Diffusion Bonding Temperature on Compressive Property of Porous Titanium Alloys for Loading-Bearing Biomedical Applications / Fuping Li, Jinshan Li, Tingting Huang, Hongchao Kou
  • Poster Session.
  • Mechanical Properties of a Rod for Spinal Deformity Correction Produced from Meta-Stable Beta Ti-Cr-Sn-Zr Alloys / Yonosuke Murayama, Akihiko Chiba
  • Industrial, Marine, and Other Applications. Titanium Application in Marine Engineering and Nuclear-Power Engineering / Igor V Gorynin, Aleksei S Oryshchenko, Valerii P Leonov, Vladimir I Mikhailov, Irina A Schastlivaia
  • A Highly Corrosion Resistant Titanium Alloy for Use in the Chemical Process Industry / Suresh C Divi, James S Grauman
  • Evolution of Defects in two Titanium Alloys Under Ti Ion Irradiation / E Jouanny, M Dehmas, S Doriot, J Malaplate, L Allais, M Le Thuaut, T Mllot, P Trocellier
  • Wear and Corrosion Resistant Titanium with Nano Titanium Carbide Reinforcements / Bhanu Chelluri, Edward A Knoth, Edward J Schumaker
  • Development of High Heat Transfer Titanium Sheet for Heat Exchanger / Keitaro Tamura, Yoshio Itsumi, Hideto Oyama, Akio Okamoto, Hiroshi Arima, Yasuyuki Ikegami
  • Industrial, Marine, and Other Applications II. Material Properties of Newly Developed Heat Resistant Titanium Alloy "Ti-1Cu-1Sn-0.35Si-0.2Nb" for Automotive Exhaust Applications / Kenichi Mori, Kazuhiro Takahashi, Hideki Fujii, Hiroaki Otsuka
  • Use of the Titanium Alloys for Applications Submitted to Shocks / T Millot, M Le Thuaut, P Longe`re
  • In Situ Electrochemical Behavior of Titanium Alloys (T40, T64) Under He Irradiation / Samuel Noirault, Johan Vandenborre, Guillaume Blain, Ferid Haddad, Massoud Fattahi
  • Electrochemical Hydriding of a Grade 2 Titanium Alloy / Vincent Duquesnes, Nicolas Creton, Steeve Deja.
  • to Ueda, Kousuke Fujita, Takanori Sakamoto, Masahiko Ikeda
  • Mechanical Properties and Deformation Behavior of Ti-10V-2Fe-3Al Micropillars Containing?-Precipitates / Wei Chen, Yan Pan, Mingda Huang, Qiaoyan Sun, Lin Xiao, Jun Sun
  • Characterization and Modeling of Titanium Single Crystals Following Dynamic Compression by Split-Hopkinson Pressure Bar / Benjamin M Morrow, Ricardo A Lebensohn, Carl P Trujillo, Francis L Addessio, Curt A Bronkhorst, Turab Lookman, George T Gray, Ellen K Cerreta
  • High Resolution Spatial Mapping of Deformation in Ti-Based Alloys / I Ghamarian, Y Liu, P Samimi, Z Wang, M J Kaufman, P C Collins
  • Innovative Materials Design for High Performance Pure Titanium / Mie Ota, Sanjay Kumar Vajpai, Hidenori Maezawa, Hikaru Kawabata, Kei Ameyama
  • Poster Session. Influence of Processing Parameters in ß Phase Field on Microstructure and Tensile Properties of TC4-DT Alloy / Hongzhen Guo, Xiaona Peng, Zhanglong Zhao, Houquan Liang, Yongquan Ning, Zekun Yao
  • Effects of Oxygen Concentration and Grain Size on Twinning Deformation Behavior in Commercially Pure Titanium / Hideto Seto, Hidenori Takebe, Kazuhiro Takahashi, Hideki Fujii, Kenichi Mori
  • Heat Treatment and Hardening Behaviors of High Strength Ti-2Al-9.2Mo-2Fe Alloy / Dong-Geun Lee, Cheng-Lin Li, Xujun Mi, Yongtai Lee
  • Effect of the Titanium Ti6Al4V Alloy Surface Preparation on the Mechanical and Corrosion Properties of the Functional Nano-Layers / Marcin Ornowski, Marcin Grobelny, Malgorzata Kalisz
  • The Elements Repartitioning Between Phases in High-Temperature Titanium Alloy During Long Time Aging / Dmitry Gadeev, Sergey Demakov, Anatoly Illarionov
  • Microstructure and Properties of High-Strength Titanium Alloys Produced with Bepm Approach / Orest Ivasishin, Dmytro Savvakin, Mykhailo Matviychuk, Yaroslav Melnyk
  • Intermetallics and MMCs. Advanced Intermetallic Titanium Aluminides / Helmut Clemens, Wilfried Smarsly, Volker Gu·ther, Svea Mayer
  • Fabrication and Characterization of Tib And Tic Reinforced Ti-5A1-5Mo-5V-1Cr-1Fe Titanium Matrix Composite / Weijie Lu, Yuanfei Han, Shuyu Sun, Liqiang Wang, Jining Qin, Di Zhang
  • Laser Metal Deposition of Titanium Aluminides
  • A Future Repair Technology for Jet Engine Blades? / Silja-Katharina Rittinghaus, Andreas Weisheit, Michael Mathes, Wilfredo Garcia Vargas
  • Effect of Processing Route on the Microstructure Evolution in the Ti-6Al-4V/Tib Composite / Ludovic Ropars, Moukrane Dehmas, Sophie Gourdet, Jeþro^me Delfosse, David Tricker, Elisabeth Aeby-Gautier
  • Effect of Post Production Heat Treatment on?-Tial Alloys Produced by Gtaw- Based Additive Manufacturing Process / Yan Ma, Dominic Cuiuri, Chen Shen, Huijun Li, Zengxi Pan
  • Forged Intermetallic?-TiAl Based Alloy Low Pressure Turbine Blade in the Geared Turbofan / Ulrike Habel, Falko Heutling, Claudia Kunze, Wilfried Smarsly, Gopal Das, Helmut Clemens
  • Intermetallics and MMCs II. Phase Equilibria and Properties of Ti-Fe-Mo Alloys With Ultra-Fine Lamellar Microstructures / AJ Knowles, NG Jones, CN Jones, HJ Stone
  • Silicide Precipitation in Silicon-Doped?iAl Alloys / Antoine Paris, Mikael Perrut, Dominique Daloz, Anne Denquin
  • Microstructure Evolution and Tensile Properties of Ti-22Al-25Nb Electron Beam Weld / W Chen, JW Li, ZY Chen, CC Wu, ZY Tang, QJ Wang
  • Intermetallics and MMCs III. Determination of Residual Stresses in SiC Fibers Reinforced SiC/Ti-22Al-26Nb Composites Using Raman Spectroscopy / Yumin Wang, Peng Xiao, Rui Yang
  • Mechanical Characterisation of Gamma Titanium Aluminides Utilising a Miniaturised Test Technique / R Owen, R C Hurst, M Dixon, N Martin, MR Bache
  • Changing of the Constituents and Microstructure at Dissimilar Alloy Tc11/Ti-22Al-25Nb Welding Interface / Yao Zekun, Qin Chun, Zhao Man, Zhao Zhanglong, Ning Yongquan
  • Additive and Near Net Shape Manufacturing. Preheating of Selective Laser Melted Ti6Al4V: Microstructure and Mechanical Properties / Bey Vrancken, Sam Buls, Jean-Pierre Kruth, Jan Van Humbeeck
  • Modeling And Experimental Measurement with Synchrotron Radiation of Residual Stresses in Laser Metal Deposited Ti-6Al-4V / Andreas Lundba·ck, Robert Pederson, Magnus Ho·rnqvist Colliander, Craig Brice, Axel Steuwer, Almir Heralic, Thomas Buslaps, Lars-Erik Lindgren
  • In-Situ High Temperature EBSD Analysis of the Effect of a Deformation Step on the Alpha to Beta Transition in Additive Manufactured Ti-6Al-4V / Jack Donoghue, Ali Gholinia, Joaþo Quinta da Fonseca, Philip Prangnell
  • Martensitic Transformation and its Effects on Microstructural Evolution and Mechanical Properties in Electron Beam Melting of Commercially Pure Titanium and Ti-6Al-4V Alloy / Kenta Yamanaka, Manami Mori, Akihiko Chiba
  • Study of Phase Transformation in Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering / Giovani Goncıalves Ribamar, Luis Paulo Mouraþo dos Santos, Hana Livia Coelho, Andreþ Jardini, Marcelo Joseþ Gomes da Silva, Hamilton Ferreira Gomes de Abreu, Miloslav Beþres?
  • On the Laser Cladding of Ti Alloy Ti-6Al-4V With Low Laser Power / Anne Mertens, Hakan Paydas, Jeþro^me T Tchuindjang, Quentin Contrepois, Raoul Carrus, Jacqueline Lecomte-Beckers
  • Microtexture of Ti6Al4V Obtained by Direct Energy Deposition (DED) Process / Laurent Weiss, Philippe Acquier, Lionel Germain, Eric Fleury
  • Titanium Based Metal-Matrix Composites via In-Situ Nitridation / Tushar Borkar, Soumya Nag, Jaimie Tiley, Rajarshi Banerjee
  • Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Manufactured Via Electron Beam Melting / Mohsen Seifi, Iman Ghamarian, Peyman Samimi, Ulf Ackelid, Peter Collins, John Lewandowski
  • Additive and Near Net Shape Manufacturing II. Advances In Ti6Al4V Additive Manufacturing in South Africa / W B du Preez, G Booysen
  • Mechanical Behavior of Additive Manufactured and Powder Metallurgy Ti6Al4V / Todd M Mower, Michael J Long
  • Effect of Hot Isostatic Pressing and Heat Treatment on Microstructure and Mechanical Properties of Pm Ti-22Al-24Nb-0.5Mo (At.%) Alloy / Lei Xu, Jie Wu, Bin Lu, Rui Yang
  • 3D Printing Of Ti Alloys and Quality Control of its Products and Powder Feedstock / X Wu, J Mei, R Boyer, J Williams
  • Effect of Pre-Consolidation Methods and Oxygen on the mechanical Properties of As-Extruded Ti-6Al-4V Alloy Rod / Ajit Pal Singh, Brian Gabbitas, Fei Yang, Rob Torrens, Aamir Mukhtar
  • Effects of Powder Processing and Sintering on Tensile Ductility of Pm Ti-6Al-4V Alloy Made by Hydrogen Sintering of Titanium Hydride Powders / P Kumar, KS Ravi Chandran, F Cao, P Sun, M Koopman, Z Zak Fang
  • Consolidation of Cristal Metals Powder of Titanium and Its Alloys by Microwave Energy to Near-Net Shape / MA Imam, BY Rock, R Rowland, TF Zarah, K Akhtar
  • Characterization of the Influence of a Fast Preforming on Superplastic Forming / Arnaud Giraudet, Franck Tancret, Freþdeþric Christien
  • Process Mapping, Fracture and Fatigue Behavior of Ti-6Al-4V Produced by Ebm Additive Manufacturing / Mohsen Seifi, Daniel Christiansen, Jack Beuth, Ola Harrysson, John J Lewandowski
  • Additive and Near Net Shape Manufacturing III.
  • Microstructure and Texture of Ti-6Al-4V Direct Laser Deposits / N Cruchley, HY Li, ZW Huang, G Baxter, C Heason, P Bowen
  • Titanium Alloy (Ti-6Al-4V) Processed by Electron Beam Melting: Microstructure and Mechanical Behavior of the As-Built and Heat-Treated Material / Charlotte de Formanoir, Seþbastien Michotte, Miguel Godino, Steþphane Godet
  • Structure-Property Correlations for Additively Manufactured Ti-6Al-4V Components Produced Using Directed Energy Deposition Processes / Jayme Keist, Karen Taminger, Todd A Palmer
  • Small Punch Testing of Electron Beam Melted (EBM) Ti-6Al-4V / Henry Illsley, Robert Lancaster, Spencer Jeffs, Gavin Baxter
  • Investigation of Microstructure and Tensile Properties of Ebm Ti-6Al-4V / ZY Chen, W Chen
  • Additive Manufacturing to Produce Standard and Custom Alloy Titanium / JC Withers, RO Loutfy, SM Pickard
  • Experimental Study of Incremental Sheet Forming Process Using Cpti / Muftooh Ur Rehman Siddiqi, Jonathan Corney, Muhammad Amir, Rahul Bhattacharya, Giribaskar Sivaswamy
  • Linear Friction Welding for Near Net Shape Manufacturing of Titanium Parts / ACB, Patrick Romilly
  • Fabrication and Characterization of Ti-6Al-4V Feedstock for Titanium Powder Injection Molding / Dongguo Lin, Young-Sam Kwon, Seong Jin Park
  • Additive and Near Net Shape Manufacturing IV. Materials Characterization of Electron Beam Melted Ti-6Al-4V / Susan Draper, Brad Lerch, Richard Rogers, Richard Martin, Ivan Locci, Anita Garg
  • A Quantitative Relationship to Predict the Effect of Extreme-Sized Pores on Tensile Ductility of Powder Metallurgy Ti-6Al-4V Alloy / P Kumar, K S Ravi Chandran
  • Predicting the Influence of Porosity on the Fatigue Performance of Titanium Components Manufactured by Selective Electron Beam Melting / Samuel Tammas-Williams, Jack Donoghue, Philip J Withers, Iain Todd, Philip Prangnell
  • On the Fatigue Crack Growth Performance of Ti6Al4V Manufactured by Laser Metal Deposition / Chen Li, Bey Vrancken, Marleen Rombouts, Jan Van Humbeeck
  • Microstructure and Mechanical Property Relationships in Electron Beam Melted Titanium Alloys / GR Davies, RJ Lancaster, RE Johnston, D Moyle, M Thomas, G Baxter, M Robinson
  • Improved Fatigue Performance of PM Ti-6Al-4V Alloy Processed By Hydrogen Sintering and Phase Transformation of TiH POWDERS / Fei Cao, K S Ravi Chandran, Pankaj Kumar, Pei Sun, Mark Koopman, Z Zak Fang
  • Environmental Behavior. Environmental Behavior of Titanium Alloys
  • Threats, Mechanisms and Knowledge Gaps / David Rugg
  • Environmental Resistance of the Uns R55400 Titanium Alloy Under Severemenergy Industry Service Conditions / Ronald W Schutz, Birendra C Jena, Heath W Walker
  • Environmental Resistance of the Uns R55400 Titanium Alloy Under Severemenergy Industry Service Conditions / Hiroshi Kamio, Hideya Kaminaka
  • Electrochemical Corrosion Properties of Timetal 54M.
  • Metastable Beta Titanium Ingot / Alireza Ghaderi, Peter D Hodgson, Matthew R Barnett
  • The Quantitative Assessment of Dynamic Recrystallization Behavior of A Near-Beta Titanium Alloy / Lian Li, Miaoquan Li, Jiao Luo
  • Characterization of a Phase in A Near ß Titanium Alloy Ti-7Mo-3Nb-3Cr-3Al During Hot Deformation / Hongchao Kou, Ke Hua, Jiangkun Fan, Bin Tang, Jinshan Li
  • Influence of Cold Caliber Rolling on a Phase Formation in Metastable ß Ti Alloys / Satoshi Emura, Baozhen Jiang, Koichi Tsuchiya, Donald S Shih
  • Microstructure Tracking of Ti-6Al-4V by In-Situ Synchrotron Diffraction During Thermomechanical Process in Beta Field / F Warchomicka, E Zehetner, C Poletti, A Stark, G Requena
  • Superplasticity of the Ultrafine-Grained Ti-6Al-4V Alloy with a Metastable a-Single Phase Microstructure / Hiroaki Matsumoto, Vincent Velay, Akihiko Chiba
  • Research on Three-Roll Screw Rolling Processfor Ti6Al4V Titaniumbar / Xiaoming Ding, Xu Huang, Aixue Sha, Mengyi Hao, Zhiwei Zhao
  • Effect of Cold Rolling on Alpha Phase Precipitation in Beta Matrix and Properties of a Beta Titanium Alloy / Bingjie Zhang, Qiaoyan Sun, Lin Xiao, Jun Sun
  • Fatigue. Comparison of The Fatigue Strength of Ti-5553 And Ti-6Al-4V for Aerospace Applications / Leonardo Contri Campanelli, Claudemiro Bolfarini, Paulo Sergio Carvalho Pereira da Silva
  • Coverage Effects in Shot Peening on HCF Performance of Ti-6Al-4V / Jochen P Fuhr, Lothar Wagner, Manfred Wollmann, Mansour Mhaede
  • Effects of Hot Working Conditions on Fatigue Strength of Ti-6Al-4V Alloy / Ikuhiro Inagaki, Yoshihisa Shirai, Ken Cho, Mitsuo Niinomi
  • Microstructural Dependence of HCF and Multi-Competing Crack Nucleation in Ti-6246 / Shan Yang, Lothar Wagner, Manfred Wollman
  • Deformation Mechanisms in Micro-Scale Specimens of Polycrystalline Ti-6242 / V Sinha, SK Jha, R Wheeler, AL Pilchak
  • Characterization of Fatigue Crack Tip Plastic Zone of a/ß Titanium Alloys With Lamellar and Equiaxed Microstructures / Yingjie Ma, Jiafeng Lei, Yuyin Liu, Rui Yang
  • Fatigue Strength of Hydrostatically Extruded Ultrafine-Grained CP Titanium / Maciej Motyka, Waldemar Ziaja, Halina Garbacz, Krzysztof Topolski, Marta Nabozna, Jan Sieniawski
  • Non-Conventional Fatigue Testing of CP Titanium for Medical Implants / Alexander E Medvedev, Rimma Lapovok, Yuri Estrin, Terry C Lowe
  • Effects of A Grain Structure on Cyclic Deformation of Ti-Fe-O Alloy at Low Temperature / Weibo Li, Osamu Umezawa
  • New Alloys II. Microstructural Control of Titanium Alloys to Enhance Material Properties / Hideto Oyama
  • Properties of Ti18
  • A New High-Strength Near-Beta Alloy for Forged Products and Fastener Stock / John Fanning
  • Development of New Trip/Twip Titanium Alloys Combining High Strength, High Strain Hardening and Improved Ductility / C Brozek, F Sun, P Vermaut, Y Millet, A Lenain, F Prima
  • Ti-7Mo-3Nb-3Cr-3Al: A New Near ß Titanium Alloy Combined High Strength Andimproved Fracture Toughness / Jinshan Li, Bin Tang, Ke Hua
  • Research of the Relationship Between Hot Process and Microstructure and Property of a New High Strength and Toughness Titanium Alloy / Qingrui Wang, Aixue Sha, Qingru Wang, Guangbao Mi
  • General Topics in Titanium I. Effect of Crystallographic Texture on Elastic Properties of Ti-5553 ß-Metastable Titanium Alloy / Aureþlien Helstroffer, Patrick Villechaise, Pascal Gadaud, Sandra Andrieu
  • Influence of Microstructure on Ultrasonic Backscattering Noise in Beta Forged Ti-6246 / Yoshinori Ito, Hiroyuki Takamatsu, Keiji Kinoshita
  • The Effects of Ultrasonic Inspection Techniques on Signal-to-Noise Ratio of Ti-17 Titanium Alloy Round Billet 350 MM IN Nominal Diameter / Jianguo Wang, Deyi Kong, Fei Liu, Jingzhou Liu, Kaixuan Wang, Yongfeng Ding
  • Effect of CO Laser-Sustained Nitrogen Plasma on Heat and Mass Transfer During Laser-Nitriding of Commercially-Pure Titanium / Amar M Kamat, Stephen M Copley, Judith A Todd
  • The Behaviour of Gum Metal (Ti-36Nb-2Ta-3Zr-0.3O wt.%) During Superelastic Cycling / N G Jones, V A Vorontsov, D Dye
  • The Effect of Microstructure On the Machinability of Ti-6Al-4V / B Denkena, T Grove
  • How Does Niobium Improve The Oxidation Resistance of Commercially Pure Titanium / C Siemers, F Brunke, K Saksl, M Kohnke, GJ Ackland, B Tegner, L Zhu
  • Phase Equilibrium and Oxidation Behavior of Ti-Al-Nb Alloys / Yoko Yamabe-Mitarai, Anna Jastrzebska, Tomonori Kitashima, Satoshi Emura, Hideyuki Murakami, Ryo Zempo, Z Pakiela
  • Influence of Aluminium Content on the Machinability and Subsurface Deformation Of Titanium Alloys / Luke Marshall, Bradley Wynne, Sam Turner, Martin Jackson
  • Ti-15Mo with Nano-Crystalline?-Precipitations for Implant Applications
  • A Feasibility Study / Florian Brunke, Carsten Siemers, Joachim Ro·sler
  • Phase Stability Study of Recently Developed Metastable p-Ti ALLOY Ti-32Nb-2Sn for Orthopedic Applications / Sumit Bahl, Aishwarya Devadiga, Kaushik Chatterjee, Satyam Suwas
  • Dwell Fatigue. Comparison of the Dwell Fatigue Behavior of Ti6242 And Ti6246 / Jianke Qiu, Yingjie Ma, Jiafeng Lei, Aijun Huang, David Rugg, Rui Yang
  • Dwell Fatigue of a Fully Lamellar Ti6242 Alloy: Deformation Mechanisms at Different Scales / Immanuel von Thu·ngen, Pierre Delaleau, Patrick Villechaise
  • Effect of Volume Fraction of Primary a Phase on Dwell and Normal Cyclic Fatigue Behavior of Ti60 Alloy / Jianrong Liu, Lina Yang, Qingjiang Wang, Rui Yang
  • Dislocation Evolution of Dwell Fatigue Near-a TITANIUM IMI 834 / Xiaoming Wang
  • Evaluation of The Relationship Between Tensile and Double Shear Strength for Various Titanium Alloys / James G Ferrero, Seymour S Sweet
  • Ordering in Titanium Alloys / A Radecka, VA Vorontsov, J Coakley, KM Rahman, PAJ Bagot, TL Martin, MP Moody, IP Jones, TC Lindley, D Rugg, D Dye
  • Determination and Analysis of the Cyclic and Dwell Fatigue Performance of Timetal® 575 / Matthew Thomas, Jon Hewitt, Martin Bache, Roger Thomas, Paul Garratt, Yoji Kosaka
  • Macrozones and dwell fatigue crack initiation in Ti-6Al-4V / Peter O Tympel, Trevor C Lindley, Edward A Saunders, Mark Dixon, David Dye
  • On the Cyclic Fatigue and Dwell Fatigue Crack Growth Response of Ti-6Al-4V / Adam L Pilchak, Alisha Hutson, W John Porter, Dennis Buchanan, Reji John
  • General Topics in Titanium II. Machinability of Micro- and Nanocrystalline Titanium in Milling Process / Witold Habrat, Maciej Motyka, Krzysztof Topolski, Jan Sieniawski, Andrzej Nowotnik
  • Martensitic Transformation Behavior of Oxygen-Added Ti-20at.% Nb ALLOY / Masaki Tahara, Tomonari Inamura, Hee Young Kim, Hideki Hosoda, Shuichi Miyazaki
  • Strengthening Strategy for A Ductile Metastable B Titanium Alloy Using Low Temperature Aging / F Sun, JY Zhang, C Brozek, P Vermaut, P Svec, HY Kim, S Miyazaki, R Banerjee, M Marteleur, P J Jacques, F Prima
  • Stress Concentrations, Slip Bands and Grain Boundaries In Commercially Pure Titanium / Yi Guo, T Ben Britton, Angus J Wilkinson
  • Effect of continuous cooling on the lamellar spacing of a a +? two-phase TiAl alloy / Gong Zheng, Jiancheng Wang, Zhixiang Qi, Guodong Tang, Pei Li, Guang Chen
  • Point, Linear and Planar Defects in Titanium / A J Ready, A P Sutton, P D Haynes, D Rugg
  • Sub-Surface Plastic and Elastic Strain Fields and Fatigue Performance Of Drilled Titanium Plates / I Violatos, M Thomas, JB Castle, BP Wynne
  • Twinning.
  • Twinning in a Single-Phase a-Titanium Alloy: Relationships Between Deformation, Ordering, And Texture / MC Brandes, William Morgan, Michael J Mlls
  • The Effect of Aluminium on Deformation and Twinning in Alpha Titanium: The ND Case / Arnas Fitzner, Matthew Thomas, Joao Quinta da Fonseca, Shu-Yan Zhang, Joe Kelleher, Michael Preuss
  • Effects of ß Stabilizing Elements on Solid Solution Strengthening and Twinning Deformation At Room Temperature in a-Titanium / Hidenori Takebe, Kenichi Mori, Kazuhiro Takahashi, Hideki Fujii
  • Time Dependent Twinning and the Role of Oxygen in the Low Temperature (<0.25 Tm) Creep Behavior of Alpha Titanium Alloys / William J Joost, Sreeramamurthy Ankem
  • Twinning Behavior of CP Ti Alloy Under Dynamic Deformation / Cheng-Lin Li, Song-Xiao Hui, Wen-Jun Ye, Xi-Guang Deng
  • Grain Boundary Interactions of Deformation Twins in CP Titanium After Room Temperature Ballistic Impact Testing / Steven J Laineþ, Kevin M Knowles, David Rugg
  • 3D characterisation of early twin formation in Ti-4Al by diffraction contrast tomography / Laura Nervo, Wolfgang Ludwig, Joao Quinta da Fonseca, Michael Preuss
  • Hall-Petch Relationship of ß-Type Ti-V-Nb-Zr Alloys Plastically Deformed Via Stress-Induced Omega Phase Transformation And Mechanical Twinning / WL Wang, XL Wang, W Mei, J Sun
  • Improvement of Strength-Ductility Tradeoff in ß Titanium Alloys Through Twinning and Dislocation Slip Combined Deformation / Xiaohua Min, Satoshi Emura, Guangbao Mi, Li Xiang, Pengfei Bai, Koichi Tsuchiya
  • Deformation Behavior I. Deformation Behaviour of Titanium Alloys Ti-6242 and Ti-6246 / Arunima Banerjee, S Balachandran, Satyam Suwas, Dipankar Banerjee
  • The Distribution of The Deformation Systems in Tension in Alpha and Alpha+Beta Titanium Alloys at Temperatures Ranging Between 296K-728K / H Li, CJ Boehlert, TR Bieler, MA Crimp
  • General Topics in Titanium III. The Effect of Temperature on the Tensile Deformation Behavior of Ti-13Cr-1Fe-3Al (wt. %) / Vahid Khademi, Masahiko Ikeda, Carl J Boehlert
  • Effect of Deformation Twinning on the Flow Stress of Rolling-Textured Pure Titanium / Daehwan Kim, Jong Woo Won, Chong Soo Lee
  • Deformation Behavior II. On the Role of the Beta Phase on Slip Activity in Ti-6Al-4V Single Colonies / Samuel Heþmery, Patrick Villechaise, David Mellier
  • Slip Band Characterisation in Ti-6Al-4V with Varying Degrees of Macrozones / D Lunt, J Quinta da Fonseca, D Rugg, M Preuss
  • Detection Of Lattice Defects During Tensile Deformation in Titanium / Masa.
  • Zhaþn?al, Jan C?apek
  • Spheroidization of a-Phase Grains in Quenched and Hot Deformed Ti-6Al-4V Titanium Alloy / Maciej Motyka, Krzysztof Kubiak, Jan Sieniawski, Waldemar Ziaja
  • Formation of Secondary a Phase During Ageing in Ti17 Alloy / Nicolas Maury, Benoi^t Denand, Moukrane Dehmas, Elisabeth Aeby-Gautier, Benoi^t Appolaire, Claude Archambeau-Mrguet, Jeþro^me Delfosse, Philippe Emile
  • The Evolution of Ti-6Al-4V Following Extreme Thermo-Mechanical Processing / Colin Owen, Spencer Jeffs, Karen Perkins, Simon Bray
  • Property-Microstructure Relationships I. Modeling of Phase Transformations in ß-Metastable Ti Alloys / Benoi^t Appolaire, Elisabeth Aeby-Gautier, Moukrane Dehmas, Amico Settefrati, Maeva Cottura, Alphonse Finel, Yann Le Bouar
  • Effect of Mn Content in Ti-Mn-Al-Fe Alloys / Yoshinori Sumi, Shigeki Ueta, Masato Ueda, Masahiko Ikeda
  • Effect of Solution Treatment on Microstructures and Properties of Ti-2Al-9.2Mo-2Fe Alloy / Cheng-Iin Li, Yong-Tai Lee, Dong-Geun Lee, Song-Xiao Hui, Wen-Jun Ye
  • Effects of Alloying Elements on the Tensile and Oxidation Properties of Alpha And Near-Alpha Ti Alloys / T Kitashima, Y Yamabe-Mtarai, S Iwasaki, S Kuroda
  • Effects of Si-Addition on Mechanical Properties of Hot-Rolled Sheet and Hot Workability in Ti-5Al-1Fe / Tomoyuki Kitaura, Akira Kawakami, Yoshihisa Shirai, Kdeki Fujii
  • Effects of Thickness and Grain Size on Tensile Properties of Pure Titanium Thin Gauge Sheets / Hidenori Takebe, Kenichi Mori, Kazuhiro Takahashi, Kdeki Fujii
  • Evaluation of Local Rate Sensitivity in a Dwell-Sensitive Ti6242 Using Micropillar Compression / Tea-Sung Jun, Zhen Zhang, Fionn PE Dunne, T Benjamin Britton
  • Tensile and Compressive Properties of Low-Cost High-Strength ß-Type Ti-Mn Alloys Fabricated by Metal Injection Molding / Ken Cho, Mtsuo Niinomi, Masaaki Nakai, Huihong Liu, Pedro Femandes Santos, Yoshinori Itoh, Masahiko Ikeda
  • Fracture Toughness Optimisation in A Hipped Ti-5553 Alloy / Jianshu Gao, Hangyue Li, Xinjiang Hao, Paul Bowen
  • Microstructure and Mechanical Properties of Titanium Alloys Produced by Hydrogen Sintering and Phase Transformation (HSPT) / James D Paramore, Pei Sun, Matt Dunstan, Z Zak Fang, Mark Koopman, Lu Yang
  • Mapping the Decomposition of ß to a in Composition and Temperature Space in Titanium Alloys / Deep Choudhuri, Tushar Borkar, Rajarshi Banerjee, Dipankar Banerjee
  • Phase Transformations II. Development of Ultrafine a Microstructures in a Metastable ß Titanium Alloy / Yufeng Zheng, John M Sosa, Robert EA Williams, Yunzhi Wang, Rajarshi Banerjee, Hamish L Fraser
  • On the Possibility of Local Structure in the Athermal Omega Phase of Ti-15Mo / JM Bennett, JS Barnard, HJ Stone, D Rugg, NG Jones
  • Morphological and Compositional Evolution of Omega Phase Precipitates and its Consequent Influence on Alpha Precipitation in Ti-V Alloys / D Choudhuri, T Alam, Y Zheng, R Shi, SG Srivilliputhur, HL Fraser, R Banerjee
  • Strain-Induced Martensitic Transformation / SL Demakov, SI Stepanov, MA Ryzhkov
  • Effect of Heat Treatment in Two-Phase Region on Equiaxed Variation Law of TC18 Alloy / Liu Ji-xiong, Ma Hong-gang, Li Wei, Li Wei-qing, Wang Xiao-xiang, Wang Ding-chun, Gao Qi
  • Study of the Elemental Partitioning for Different Transformation Conditions in the Ti-5553 Alloy / Guillaume Charrier, Moukrane Dehmas, Marion Descoins, Dominique Mangelinck, Elisabeth Aeby-Gautier, Benoit Appolaire, Sandra Andrieu, Francis Soniak
  • Simulation of Solid-State Weld Microstructures in Ti-17 Using Thermo-Mechanical Exposures / Jonathan Orsborn, GB Viswanathan, Thomas F Broderick, R EA Williams, Hamish L Fraser
  • Structural and Compositional Characteristics of Isothermal Omega Phase in Beta Titanium Alloys / Yufeng Zheng, Talukder Alam, Robert EA Williams, Soumya Nag, Rajarshi Banerjee, Hamish L Fraser
  • Property-Microstructure Relationships II. A Study on Microstructures and Properties of A high Strength/Toughness Ti-3Al-1Fe-4V-4.5Cr Alloy / Cheng-Iin Li, Xu-Jun Mi, Wen-Jun Ye, Song-Xiao Hui
  • Deformation Studies of Titanium Wire for Fastening Systems Performance / JW Foltz, SM Schlegel
  • Effect of Caliber Rolling on Microstructure and Mechanical Properties of Ti-6Al-4V / Koichi Tsuchiya, Satoshi Emura, Donald S Shih
  • Effect of Cooling Rates on Microstructure and Properties of VST5553 Alloy / Galina Savvateeva, Volkov Anatoly, Michael Leder, Elena Ahmetyanova, Kirill Rusakov, Anna Zhelnina
  • Mechanical Properties of Extruded Ti-6Al-4V Having Acicular a+ß Microstructure Formed in Refined a Grains / Shinya Nishiyama, Yoshihisa Shirai, Kdeki Fuji
  • Mechanical Performance and Microstructure of Extruded Pure Ti Based Materials Reinforced with Nitrogen and Hydrogen Via Powder Metallurgy Route / Takanori Mimoto, Junko Umeda, Katsuyoshi Kondoh
  • Phase Transformations III. In-Situ Investigation of Phase Transformation Kinetics in Ti-6Al-4V Under Rapid Heating Condition Using High-Energy Synchrotron Diffraction / A Idhil Ismail, M Dehmas, E Aeby-Gautier, B Appolaire
  • An Investigation of Phase Transformation in (Ti-6Al-4V)-H Using in Situ High-Energy Synchrotron XRD / Pei Sun, Z Zak Fang, Mark Koopman, James Paramore, Ravi Chandran
  • Phase Transformation During Isothermal Heat Treatment in ß-Quenched Ti-7Mo-3Nb-3Cr 3Al Alloy / Ke Hua, Jinshan Li, Mao Sun, Bin Tang, Hongchao Kou
  • In-Situ Small Angle X-Ray Scattering Study of? Particles Growth Kinetics in Ti
  • 15 wt.%Mo / Jana S?milauerovaþ, Vaclav Holyþ, Petr Harcuba, Dominik Kriegner, Milos? Janec?ek
  • Microstructure Development During Cooling of ELI Ti-5.5Al-4.25Zr-5.7V-1.25Mo-0.06Pd -0.115O from the Beta Phase Field / J Jensen, H Boeckels, R Schutz, H J Rack
  • Phase Constitution and Aging Behavior of Ti-10 Mass% Mn-Oxygen Alloys / Masahiko Ikeda, Masato Ueda, Yoshinori Sumi
  • Investigation of a Phase Precipitation Mode During Ageing Treatment in Ti-18 Alloy / E Lebrun, P Svec, Y Millet, S Andrieu, F Prima
  • Property-Microstructure Relationships III. Harmonic Structure: An Effective Tailored Heterogeneous Microstructural Design to Strengthen Ti-6Al-4V Alloy / Sanjay Kumar Vajpai, Me Ota, Kei Ameyama, Tomoyuki Watanabe, Ryo Maeda, David Tingaud, Guy Dirras
  • Influence of Fine Scale Alpha Precipitation on the Mechanical Properties of Beta-21S Commercial Ti Alloy / SA Mantri, D Choudhuri, JD Cotton, R Banerjee
  • Influences of Direct Aging on the Mechanical Properties and Microstructure of Hot Rolled BTi-6554 Alloy Bars / Wangx Iao-Xiang, Wang Wei-qi, Hui Song-xiao
  • The Shear Response of High-Purity Ti and Ti-6Al-4V as A Function of Texture / George T (Rusty) Gray III, V Livescu, RA Beal, EK Cerreta, BM Morrow, KS Vecchio
  • Relationship Between Microstructure and Tensile Properties of A Ti-6Al-4V Produced by Spark Plasma Sintering / Ugras Kus, Julitte Huez, Denis Delagnes, Geoffroy Chevallier, Claude Estourne`s
  • Investigation of Microhardness and Microstructure in Ultra-Fine Grained Metastable Beta-Ti Alloys Prepared by High Pressure Torsion / Kristiþna Vaþclavovaþ, Josef Straþskyþ, Petr Harcuba, Veronika Polyakova, Irina Semenova, Milos? Janec?ek
  • Investigation on the Bi-Lamellar Microstructure in Ti-6Al-4V / Yan Chong, Nobuhiro Tsuji, Tilak Bhattacharjee
  • Modeling and Creep.
  • Dv-X a First Principle Analysis of the Effect of Alloying Elements on the a" Phase Formation in Ti Alloys / Sengo Kobayashi, Riku Wakamoto, Tatsuaki Sakamoto
  • Simulation of Coupled Temperature, Microstructure and Internal Stresses Evolutions During Quenching of A ß-Metastable Titanium Alloy / Julien Teixeira, Benoi^t Denand, Elisabeth Aeby-Gautier, Sabine Denis, Georges Cailletaud
  • Nonlinear Relationship Between Processing Parameters and Mechanical Properties In Ti6Al4V Alloy by Using Fuzzy Neural Network / Yuanfei Han, Xiaofang Yang, Weidong Zeng, Weijie Lu
  • Continuous Dynamic Recrystallization Modeling in Ti-17 Alloy: Application to the Forging Operations in ß AND ß + a FIELDS / M Semblanet, L Pallot, D Piot, F Montheillet, M Derrien, Y Mllet, C Poletti
  • The Influence of Aluminum Concentration on Static Recrystallization in Alpha Titanium Alloys / Anna M Trump, John E Allison
  • Modelling of Creep Behaviour of Two-Phase Titanium Alloy / Waldemar Ziaja, Andrzej Kawalec, Krzysztof Kubiak
  • Room-Temperature Creep and Stress Relaxation in Titanium: Influence of Oxygen and Hydrogen Contents / B Barkia, V Doquet, JP Couzinieþ, I Guillot
  • Effect of Dynamic Strain Ageing on Creep in Titanium Alloy, IMI 834 / Priyanka Agrawal, S Karthikeyan, Dipankar Banerjee
  • 60 Years of Microstructure Voyage in Titanium Alloy Technology Development / Sesh Tamirisakandala, Patrick Russo
  • A Brand New Near a Alloy With Low Temperature Superplasticity, Ti-2111S / Yoshio Itsumi, Takashi Konno, Keita Sasaki, Hideto Oyama
  • Timetal® 407: A Titanium Alloy to Enable Cost Reduction / Steven James, Yoji Kosaka, Roger Thomas, Paul Garratt
  • Microstructure, Processing and Properties of A New Two-Phase Titanium Alloy / Jiafeng Lei, Yingjie Ma, Jianke Qiu, Yuyin Liu, Rui Yang
  • A New Class of Oxidation-Resistant, Microstructural-Stabilized and Cold-Workable Titanium Alloys for Exhaust Applications / J Kiese, C Siemers, C Schmidt
  • Production of High-Strength Titanium Alloys by Pre-Alloyed Powder Metallurgical Process / Masashi Hayakawa, Osamu Kanou, Nobuo Fukada
  • Fireproof Property and Its Mechanism of A New High Temperature Titanium Alloy / Guangbao Mi, Xu Huang, Jianming Cai, Siqing Li, Jingxia Cao, Chunxiao Cao
  • Electrical Resistivity Change With Temperature of New Ti-Alloys / Mohamed Abdel-Hady Gepreel, Asmaa A Hendi, Ruqayah H Alorainy
  • Processing-Microstructure Relationships. Influence of ß-Forging on Texture Development In Ti 6246 Alloy / Sebastien Le Corre, Romain Forestier, Francıois Brisset, Marie-Heþle`ne Mathon, Denis Solas
  • Hot Deformation and Recrystallization of A.
  • Plenary Session. Titanium Research Developments in the United Kingdom / Martin Jackson, Matthew Thomas
  • Recent Advances in Titanium Technology in the USA / Vasisht Venkatesh, Rodney R Boyer
  • Titanium Production, Research and Applications in CIS: Current Status and Future Trends / Orest M Ivasishin, Andrey V Aleksandrov
  • Recent Topics of Titanium Research and Development in Japan / Mitsuo Niinomi, Kazuo Kagami
  • Developments in Titanium Research and Applications in Germany / C Siemers, J Kiese
  • Progress of Titanium Industry, Technologies and Research in China / Hui Chang, Lian Zhou
  • Extraction and Powder Production. Electrolytic Ti Powder Production from Ore Sources / JC Withers, RO Loutfy, SM Pickard
  • Production of Titanium Oxycarbide from Iron-rich Titanium Ores / Farzin Fatollahi-Fard, Petras Christiaan Pistorius
  • Solid State Extraction and Consolidation of Titanium Alloys Direct from Synthetic Rutile / Lyndsey L Benson, Ian Mellor, Martin Jackson
  • Influence of Temperature on Electrode Reaction of Ti in MgF-CaF Containing Ti Oxide / Toshihide Takenaka, Shou Shimokawa, Kazuyoshi Nishikawa, Yuka Yamanaka, Taiki Morishige
  • Characterization of CSIR-Ti Powder and its Consolidation by Microwave Sintering / DS Van Vuuren, MA Imam, SJ Oosthuizen, BY Rock, TF Zahrah, H Chikwanda, L Mahlatji
  • Sustainable Low Cost Titanium Oxide Production
  • A Concept / Neale R Neelameggham, Brian R Davis, M Ashraf Imam
  • Novel Titanium Ore Upgrading Process Free from Waste Discharge / Jungshin Rang, Tom H Okabe
  • Hydrochloric Acid Leaching of Calcium Vapor Reduction Products of TiO / Baoqiang Xu, Dongsheng Wang, Bin Yang, Yongnian Dai
  • Establishment of the High Purity Titanium Billet Production Method Using Titanium Sponge Produced by the Kroll Process / OTC, Takahiro Eda, Nobuo Nakamura, Tadao Araike
  • Extraction and Powder Production II. Continuous Extrusion of Titanium Particulates / Ben Thomas, Fatos Derguti, Martin Jackson
  • Effect of Powder Density Variation on Premixed Ti-6Al-4V and Cu Composites During Laser Metal Deposition / Mutiu F Erinosho, Esther T Akinlabi
  • Exploitation of Spark Plasma Sintering and One-Step Forging for Cost-Effective Processing of Titanium Alloy Powders / Nicholas Weston, Fatos Derguti, Martin Jackson
  • Exploring Alternative Methods for Titanium Production / Amarchand Sathyapalan, Mchael Free, Zak Fang
  • Deoxygenation of Titanium Hydride with Calcium Hydride / Yang XIA, Zhigang Zak FANG, Tuoyang ZHANG, Ying ZHANG, Pei SUN, Zhe HUANG
  • Methods to Prepare Spherical Titanium Powders and Investigation on Spheroidization of HDH Titanium Powders / Yongren Liang, Ymjiang Wu
  • A Novel Process for the Production of Titanium Powders Bespoke to Additive Manufacturing / Ian Mellor, Greg Doughty, Matthew Piper, Terri Ellis, Kartik Rao, James Deane
  • Extraction and Powder Production III. The Magnesiothermic Reduction of Up-Graded Ti-SLAG, Investigated by TGA-DSC / Ying Zhang, Zhigang Zak Fang, Zhe Huang, Yang Xia, Pei Sun
  • New Separation Technique of Titanium and Iron for Titanium Ore Upgrading / Hidehiro Sekimoto, Shuhei Yahaba, Shintaro Chiba, Katsunori Yamaguchi
  • Titanium Recycling Process Based on A Chlorination Reaction Utilizing Chloride Waste / Yu-ki Taninouchi, Yuki Hamanaka, Toru H Okabe
  • Development of X-Ray Sorting System for Titanium Alloy Chip / Tetsuya Sakamoto, Shuhei Funamoto, Hitoshi Murakoshi, Yuichi Kodama
  • Titanium Sponge Production Technology in China / Qiongsha Liu, Phil Baker, Hanyue Zhao
  • Electrochemical Behavior of Titanium Ions at Liquid Metal Cathodes in Molten Salts / Handong Jiao, Long Zhang, Shuqiang Jiao
  • Wrought Processing and Fabrication. Advances in the Development of Processing-Microstructure Relations for Titanium Alloys / SL Semiatin, AL Pilchak
  • ß Recrystallisation Characteristics of a + ß Titanium Alloys for Aerospace Applications / Michael Allan, Matthew Thomas, Jeffery Brooks, Paul Blackwell
  • Polycrystal Plasticity Simulation of Microtextured Titanium / VM Miller, MP Echlin, IJ Beyerlein, TM Pollock
  • Comparison of Hot Working Behavior of Titanium Alloys with Similar Microstructures / Shanoob Balachandran, Satyam Suwas, Dipankar Banerjee
  • Mechanical Behaviour and Microstructural Evolution in Welding Ti-6Al-4V / J W Brooks, R M Ward, B Perumal, H C Basoalto
  • Flow Instabilities During Hot Deformation of Titanium Alloys and Titanium Matrix Composites / Cecilia Poletti, Dilek Halici, Song Xue
  • Influence of the Forming Temperature on the Microstructure and Mechanical Properties of Extruded Ti6Al4V Rods / Soeren Mueller, Rene Nitschke, Sven Gall
  • Improved Creep Resistance of Ti-6Al--4V Alloy by Electron Beam Welding Process Plus Annealing Treatment and its Microstructure Analysis / Le Mn Wang, Chih Jen Tsai
  • Hot Deformation II. Status and Progress in Wrought Processing of Titanium / VV Tetyukhin, MO Leder, VA Kropotov, AN Troshin, AV Poludin, AV Volkov, AV Berestov, AV Zhloba
  • GFM Radial Forging Machines for the Titanium Market / Robert Koppensteiner, Martin Auer, Brad Fair
  • Effect of Isothermal Forging on the Microstructure and Properties of Ti-17 Titanium Alloy Prepared by Different Powder Compaction Methods / Zhanglong Zhao, Hui Li, Hongzhen Guo, Zekun Yao, Yongquan Ning
  • Friction Stir Processing of Metastable Beta Titanium Alloy Ti- 5Al-5Mo-5V-3Cr / Shanoob Balachandran, Rajiv S Mshra, Dipankar Banerjee
  • The Effect of Hydrogen-Deformation Interactions on Recrystallization of ß-21S Titanium Alloys / Jing Wen, Nathalie Main, Eric Fleury
  • An EBSD Investigation of Ti-6Al-4Nb and Ti-10Al-4Nb Alloys Processed by Plane Strain Compression Test / A Jastrzebska, KS Suresh, T Kitashima, Y Yamabe-Mtari, Z Pakiela
  • Dissolution and Coarsening of Alpha Phase in Ti-15Mo-(0.35-0.5) O / H Boekels, HJ Rack
  • Machining & Welding. Recycling of Ti-6Al-4V Chips: Influence of the Machining Process on the Chip Quality / B Denkena, T Grove, P Helmecke
  • The Effect of Finish Milling on the Surface Integrity and Subsurface Microstructure in Ti-5Al-5Mo-5V-3Cr / Adam Cox, Jean-Philippe Villain-Chastre, Sam Turner, Martin Jackson
  • The Determination of Residual Stress in Extruded Ti-6Al-4V by Contour Method and Finite Element Analysis / JD Pollard, S Rahimi, A Watford, M Jackson, BP Wynne
  • Fatigue Strength Dependence on Microstructure and Defects in Ti-6Al-4V Welds / Sakari Tolvanen, Robert Pederson, Uta Klement
  • Microstructure and Property of Titanium Heterogeneous Laser Welding / Laurent Weiss, Mien Zollinger, Pierre Sallamand, Eugen Cicala, Eric Heury
  • Rapid Fabrication of Bond with High Strength in the Press Bonding of Titanium Alloy / Hong Li, Maoquan Li, Weixin Yu
  • Orbital Friction Welding of Titanium Blisks: Process Characteristics and Microstructure Development / Ulrich Raab, Sebastian Levin, Christoph Heinze, Glenn Cassar, Lothar Wagner
  • Effect of Shot Peening and Roller-Burnishing on the Fatigue Performance of CP-Ti Friction-Welded Joints / M Basha, U Raab, A Ahmed, M Mhaede, M Wollmann, L Wagner
  • Microstructure and Texture Variations in High-Temperature Compression of Ti60 Alloy with Lamellar Microstructure / Qingjiang Wang, Zibo Zhao, Hao Wang, Jianrong Liu, Rui Yang
  • Poster Session. Correlation Between Processing Map Domains and Microstructure of 50% Hot Compressed IMI 834 Ti Alloy / Basanth Kumar K, Rajamallu Karre, Suhash R Dey
  • Melting and Casting.
  • Recent Developments in Melting and Casting Technologies for Titanium Alloys / Stephen Fox, Ashish Patel, David Tripp, Jim Barratt, Paul McQuay
  • Production of Titanium Alloys Ingots by Ebchm Technology / BE Paton, SV Akhonin, VA Berezos
  • Applications of Finite Element Modeling on Vacuum ARC Remelting (VAR) and Plasma ARC Melting (PAM) Processes of Titanium Alloys / Partchapol Sartkulvanich, Don Li, Oscar Yu, Ernie Crist, Shane Probst
  • Structure and Homogeneity of Chemical Composition of Large-Size Ingots of a
  • Titanium Alloys / AS Oryshchenko, AS Kudriavtsev, MO Leder, I Yu Puzakov, AG Khachaturyan, SN Petrov
  • Control of Alpha Case on Investment Cast Ti 6Al-4V Using An Industrial Shelling System / G Morin, G Marin, MC Parr, L Forget, J, Carignan
  • Evaluation of Alpha Case on Ti-6Al-4V Castings Using Various Techniques / A Bois-Brochu, MC Parr, G Morin, J Carignan, G Marin
  • Interfacial Reaction Between Liquid Titanium and Oxide Mold Contained Alpha-Case Formation Phase During Investment Casting / Seul Lee, Jea Eun Jeon, Young Jig Kim
  • An Investigation of pH Control on Binder for Investment Casting of Titanium / Jae-Eun Jeon, Seul Lee, Bong-Jae Choi, Young Jig Kim
  • Melting and Casting II. Containerless Rapid Solidification of Liquid Ti-Al-V Alloys Inside Drop Tube / SL Wei, LJ Huang, J Chang, SJ Yang, YT Ma, L Geng
  • Alloy Composition-Microstructure-Properties. Influence of a Precipitation at ß/ß Grain Boundaries on a Microtexture in A ß- Metastable Titanium Alloy with and without Previous Deformation / Matthieu Salib, Mien Teixeira, Lionel Germain, Benoit Denand, Nathalie Gey, Elisabeth Aeby-Gaurier
  • Selectivity of Burgers Orientation Relationship Variants During ß-->a Transformation in ß-Titanuim Alloy VT22 Under Severe Hot Forging and Rolling / SV Prikhodko, PE Markovsky, SD Sitzman, MA Gordillo, JMK Wiezorek, OM Ivasishin
  • Investigation of a/ß Interface Structure in Titanium Alloy Using Hrstem / Yufeng Zheng, Robert EA Williams, Gopal B Viswanathan, William AT Clark, Hamish L Eraser
  • Grain Boundary a and ß Grain Boundary Orientation in Titanium Alloys / Adam L Pilchak, Dipankar Banerjee, JC Williams
  • Phase Transformations in Metastable Ti-15Mo During Linear Heating / Pavel Zhaþn?al, Petr Harcuba, Milos? Janec?ek, Jana S?milauerovaþ, Josef Veselyþ, Bohumil Smola, Mariia Zimina
  • Phase Transformations in Beta-Ti Alloys Studied by In-Situ Methods / Petr Harcuba, Jana S?milauerovaþ, Maþhal Haþjek, Pavel.

Ejemplares similares