Cargando…

The effect of temperature and other factors on plastics and elastomers /

This reference guide brings together a wide range of critical data on the effect of temperature on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The effects of humidity level and strain rate on mechanical and electrical properties are also covered...

Descripción completa

Detalles Bibliográficos
Clasificación:Libro Electrónico
Autor principal: Mckeen, Laurence W.
Formato: Electrónico eBook
Idioma:Inglés
Publicado: Waltham, MA : William Andrew Publishing, 2014.
Edición:Third edition.
Colección:PDL handbook series.
Temas:
Acceso en línea:Texto completo

MARC

LEADER 00000cam a2200000 i 4500
001 KNOVEL_ocn879334726
003 OCoLC
005 20231027140348.0
006 m o d
007 cr cnu---unuuu
008 140507s2014 mau ob 001 0 eng d
040 |a OPELS  |b eng  |e rda  |e pn  |c OPELS  |d E7B  |d UMI  |d DEBBG  |d DEBSZ  |d COO  |d ZCU  |d OCLCF  |d UIU  |d N$T  |d KNOVL  |d EBLCP  |d U3W  |d D6H  |d CEF  |d RRP  |d OTZ  |d UAB  |d MERER  |d OCLCQ  |d AU@  |d VT2  |d CNCEN  |d OCLCQ  |d OCLCO  |d COM  |d OCLCO  |d OCLCQ  |d OCLCO 
019 |a 877885389  |a 878263195  |a 881691132  |a 1105777460 
020 |a 9780323310178 
020 |a 0323310176 
020 |z 0323310168 
020 |z 9780323310161 
024 8 |a C20130183936 
024 8 |a 9780323310161 
029 1 |a AU@  |b 000059331796 
029 1 |a AU@  |b 000067110021 
029 1 |a AU@  |b 000070638052 
029 1 |a CHBIS  |b 010295269 
029 1 |a CHNEW  |b 001012192 
029 1 |a CHVBK  |b 327765194 
029 1 |a DEBBG  |b BV042033173 
029 1 |a DEBBG  |b BV042309773 
029 1 |a DEBSZ  |b 414186591 
029 1 |a DEBSZ  |b 414275462 
029 1 |a DEBSZ  |b 431675147 
029 1 |a GBVCP  |b 783786859 
029 1 |a NLGGC  |b 375085688 
035 |a (OCoLC)879334726  |z (OCoLC)877885389  |z (OCoLC)878263195  |z (OCoLC)881691132  |z (OCoLC)1105777460 
037 |a CL0500000451  |b Safari Books Online 
050 4 |a TA455.P5 
072 7 |a TEC  |x 009010  |2 bisacsh 
082 0 4 |a 620.1/9231  |2 22 
049 |a UAMI 
100 1 |a Mckeen, Laurence W. 
245 1 4 |a The effect of temperature and other factors on plastics and elastomers /  |c Laurence W. McKeen. 
250 |a Third edition. 
264 1 |a Waltham, MA :  |b William Andrew Publishing,  |c 2014. 
300 |a 1 online resource 
336 |a text  |b txt  |2 rdacontent 
337 |a computer  |b c  |2 rdamedia 
338 |a online resource  |b cr  |2 rdacarrier 
347 |a text file 
490 1 |a PDL handbook series 
500 |a Includes index. 
520 |a This reference guide brings together a wide range of critical data on the effect of temperature on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The effects of humidity level and strain rate on mechanical and electrical properties are also covered. The data are supported by explanations of how to make use of the data in real world engineering contexts. High (and low) temperatures can have a significant impact on plastics processing and applications, particularly in industries such as automotive, aerospace, oil and gas, packaging, and medical devices, where metals are increasingly being replaced by plastics. Additional plastics have also been included for polyesters, polyamides and others where available, including polyolefins, elastomers and fluoropolymers. Entirely new sections on biodegradable polymers and thermosets have been added to the book. The level of data included - along with the large number of graphs and tables for easy comparison - saves readers the need to contact suppliers, and the selection guide has been fully updated, giving assistance on the questions which engineers should be asking when specifying materials for any given application. Trustworthy, current thermal data and best practice guidance for engineers and materials scientists in the plastics industry. More than 1,000 graphs and tables allow for easy comparison between plastics. Entirely new sections added on biopolymers and thermosets. 
588 0 |a Print version record. 
504 |a Includes bibliographical references and index. 
505 0 |a Front Cover; The Effect of Temperature and Other Factors on Plastics and Elastomers; Copyright Page; Contents; Preface; 1 Introduction to Plastics, Polymers, and Their Properties; 1.1 Polymer/Plastic Chemistry; 1.1.1 Polymerization; 1.1.1.1 Addition Polymerization; 1.1.1.2 Condensation Polymerization; 1.1.2 Copolymers; 1.1.3 Linear, Branched, and Cross-linked Polymers; 1.1.4 Polarity; 1.1.5 Unsaturation; 1.1.6 Steric Hindrance; 1.1.7 Isomers; 1.1.7.1 Structural Isomers; 1.1.7.2 Geometric Isomers; 1.1.7.3 Stereoisomers-Atactic, Isotactic, and Syndiotactic. 
505 8 |a 1.1.8 Inter- and Intramolecular Attractions in Polymers1.1.8.1 Hydrogen Bonding; 1.1.8.2 Van der Waals Forces; 1.1.8.3 Chain Entanglement; 1.1.9 General Classifications; 1.1.9.1 Molecular Weight; 1.1.9.2 Thermosets vs. Thermoplastics; 1.1.9.3 Crystalline vs. Amorphous; 1.2 Plastic Compositions; 1.2.1 Fillers, Reinforcement, Composites; 1.2.2 Combustion Modifiers, Fire, Flame Retardants, and Smoke Suppressants; 1.2.3 Release Agents; 1.2.4 Slip Additives/Internal Lubricants; 1.2.5 Antiblock Additives; 1.2.6 Catalysts; 1.2.7 Impact Modifiers and Tougheners; 1.2.8 UV/Radiation Stabilizers. 
505 8 |a 1.2.9 Optical Brighteners1.2.10 Plasticizers; 1.2.11 Pigments, Extenders, Dyes, and Mica; 1.2.11.1 Titanium Dioxide; 1.2.11.2 Carbon Black; 1.2.12 Coupling Agents; 1.2.13 Thermal Stabilizers; 1.2.14 Antistats; 1.3 Testing of Plastics; 1.3.1 Mechanical Property Testing of Plastics; 1.3.1.1 Tensile Properties; 1.3.1.2 Compressive Properties; 1.3.1.3 Shear Properties; 1.3.1.4 Flexural Properties; 1.3.1.5 Impact Property Testing of Plastics; Izod Impact Strength and Charpy Impact Strength; Gardner and Falling Dart Impact Strength; 1.3.2 Thermal Property Testing of Plastics. 
505 8 |a 1.3.2.1 Heat Deflection Temperature1.3.2.2 Vicat Softening Temperature; 1.3.2.3 Melt Flow Index; 1.3.2.4 Glass Transition Temperature (Tg); Mechanical Methods of Estimating Tg; Thermal Methods of Estimating Tg; Volume Methods of Determining Tg; Electrical Methods of Determining Tg; 1.3.2.5 Melting Point (Tm); 1.3.2.6 Coefficient of Thermal Expansion; 1.4 Principles of Plastic Product Design; 1.4.1 Rigidity of Plastic Materials; 1.4.2 The Assessment of Maximum Service Temperature; 1.4.3 Assessment of Thermal Stability; 1.4.4 Toughness; 1.4.5 The Assessment of Impact Strength. 
505 8 |a 1.4.6 Time-Dependent Behavior1.4.7 Selection Guides; 1.5 Summary; References; 2 Styrenic Plastics; 2.1 Acrylonitrile Butadiene Styrene (ABS); 2.2 Methyl Methacrylate- Acrylonitrile-Butadiene-Styrene (MABS) Polymer; 2.3 Acrylonitrile Styrene Acrylate (ASA); 2.4 Polystyrene (PS); 2.5 Styrene Acrylonitrile (SAN); 2.6 Styrenic Butadiene Block Copolymers (SBC); 2.7 Styrene Maleic Anhydride (SMA); 2.8 Styrenic Blends and Alloys; References; 3 Polyether Plastics; 3.1 Acetals-Polyoxymethylene (POM or Acetal Homopolymer); 3.2 Polyoxymethylene Copolymer (POM-Co or Acetal Copolymer). 
542 |f Copyright: Elsevier Science & Technology  |g 2014 
590 |a O'Reilly  |b O'Reilly Online Learning: Academic/Public Library Edition 
590 |a Knovel  |b ACADEMIC - Plastics & Rubber 
590 |a Knovel  |b ACADEMIC - Chemistry & Chemical Engineering 
650 0 |a Plastics  |x Thermal properties. 
650 0 |a Plastics  |x Testing. 
650 0 |a Elastomers  |x Thermal properties. 
650 0 |a Elastomers  |x Testing. 
650 6 |a Matières plastiques  |x Propriétés thermiques. 
650 6 |a Élastomères  |x Propriétés thermiques. 
650 7 |a TECHNOLOGY & ENGINEERING  |x Chemical & Biochemical.  |2 bisacsh 
650 7 |a Elastomers  |x Testing  |2 fast 
650 7 |a Elastomers  |x Thermal properties  |2 fast 
650 7 |a Plastics  |x Testing  |2 fast 
650 7 |a Plastics  |x Thermal properties  |2 fast 
776 0 8 |i Print version:  |a Mckeen, Laurence W.  |t Effect of temperature and other factors on plastics and elastomers  |z 0323310168  |w (OCoLC)872222013 
830 0 |a PDL handbook series. 
856 4 0 |u https://appknovel.uam.elogim.com/kn/resources/kpETFPEE0L/toc  |z Texto completo 
938 |a ProQuest Ebook Central  |b EBLB  |n EBL1676498 
938 |a ebrary  |b EBRY  |n ebr10861904 
938 |a EBSCOhost  |b EBSC  |n 761195 
994 |a 92  |b IZTAP