Cargando…
Mechanical and Electrical Technology VII.
| Clasificación: | Libro Electrónico |
|---|---|
| Autor principal: | |
| Otros Autores: | , |
| Formato: | Electrónico eBook |
| Idioma: | Inglés |
| Publicado: |
Pfaffikon
Trans Tech Publications Inc.,
2015.
|
| Colección: | Applied mechanics and materials.
|
| Temas: | |
| Acceso en línea: | Texto completo |
Tabla de Contenidos:
- Intro
- Mechanical and Electrical Technology VII
- Preface, Committees and Sponsors
- Table of Contents
- Chapter 1: Materials and Technologies of Chemical Industry
- Carbon Nanotube-Prussian Blue Spongiform Adsorbent for Selective Capture of Cesium and Strontium
- Analysis of Packaging Properties of Composite Antibacterial Films by Response Surface Model
- Hydrophilic Modification of PVDF Membrane by Using PHEMA-PDMS-PHEMA Amphiphilic Copolymer as Addictive
- Effect of Nano TiO2 Treatment on Disperse Dyeing and Self-Cleaning Properties of PET Fabric
- Photodegradation of Phenol Using TiO2 Nanotubular Thin Film Fabricated by Sonoelectrochemical Anodization
- Structural Investigation of Ceria and Copper Modified Silica from Agricultural Biomass
- Adsorption Studies of Citrus maxima (Pomelo) Fruit Peels in the Removal of Lead (II) from Aqueous Solution
- Formulation of Nanostructured Lipid Carriers Loaded with Algae Extract: A Detailed Study of Preparation and Evaluation of Antioxidant Potential for Stabilization of Fish Oil
- A Preliminary Study on the Preparation of Activated Carbon from Cyrtosperma chamissonis Petioles via Single Step H3PO4 Activation
- Utilizing Rayon Fiber Residues from Fiber Manufacturing Industry for Preparation of Cellulose/CMC Hydrogels
- Processing of Sustainable Polymer with Thermoplastics by Injection Moulding
- Impacts of Cooling Rates on Voids in Waxy Crude Oil under Quiescent Cooling Mode
- Processing Temperature of Sustainable Polymer with Thermoplastics by Injection Moulding (Part 1)
- Electric Arc Furnace Dust Treatment by the Combination of Pyro/Hydrometallurgical Processes
- Catalytic Hydrogenation of Oil Sand's Natural Bitumen
- Comprehensive Analysis Method for Water Inrush Source in Fracture-Pore Gas Reservoirs with Bottom Water: A Case from M Gas Reservoir.
- Numerical Simulation of Thermal Plasma Gasification Process
- A Novel Hybrid Design of Incineration-Gasification for Energy Saving
- Energy Analysis of Ethanol Steam Reforming Integrated Solid Oxide Fuel Cell for Electrical Power Generation
- Development of 1:1 and 2:1 Channel Ratio Bipolar Plates (BPPs) for PEMFC
- Low Dosage Gamma Irradiation of Poly(glycerol sebacate)-co-lactic Acid Utilizing Methyl Methacrylate Crosslinker
- Graphite/Bio-Based Epoxy Composites: The Mechanical Properties Interface
- Synthesis and Characterization of Cobalt-Nickel Nanowires Formed under External Magnetic Field
- Synthesis of ZrO2 Nanotubes by Anodization of Zr Foil
- Use of Classification Trees and Rule-Based Methods to Predict Shapes of Nano-Aggregates of Reinforcement Fillers
- Compressive Behaviour of Low Density Polymeric Syntactic Foams
- Adhesion Phenomenon of Titanium as Cathode in Aluminum Anodizing
- Aluminophosphosilicate Glasses as an Alternative Source for Microporous Materials of Technically Attractive Compositions and Morphological Characteristics
- Graphite/Bio-Based Epoxy Composites: Structural, Optical and Electrical Properties
- Photoactive Anode of NiO/TiO2 Nanotube p-n Junctions and Application in Photoassisted Water Electrolysis
- Gas Sensitivity of Cr Doped BN Sheets
- First-Principles Study of Tuning the Band Gap with Cr Doped BN Sheets
- High Impact Toughness ABS/CaCO3 Nanocomposites Prepared through Pressure Induced Flow Moulding
- Microstructure Characterization on Silicon Carbide Formation from Natural Wood
- Structure Characterization and Property Analysis of HKT800 Carbon Fiber
- Elastic and Damping Characterization of Biopolymer Composite
- Accelerated Aging Cycle of Composite Reinforced High Density Polyethylene (HDPE) Roofing Panel.
- Finite Element Analysis of Casing Material Behavior in Steam Injection Well Operations
- Impact Strength of Laminated Floor Panel from Kenaf (Hibiscus cannabinus) High Density Fibreboard
- Chapter 2: Steels and Alloys
- Thermal Properties of Si Mechanically Alloyed with FeSi2 and CrSi2
- Morphology and Thermal Stability of Metastable Precipitates Formed in an Al-Mg Alloy Aged at 373K and 473K
- A Probabilistic Model of Wood Defects
- Corrosion Behavior of Copper-Nickel Alloy in Marine Environment (Review Paper)
- Effect of Flow Velocity of Sea Water on Corrosion Rate of Low Carbon Steel
- Preparation and Performance Test of Shielding Fabric of Amorphous Ni-Fe-P Alloy
- Chapter 3: Materials Processing and Manufacturing Tool in Mechanical Engineering
- Investigation of Chip Formation and Tool Wear in Drilling Process Using Various Types of Vegetable-Oil Based Lubricants
- Effect of Double Shoulder Tool Rotational Speed on Thermo-Physical Characteristics of Friction Stir Welded 16mm Thick Nylon6
- Extracting Specific Cutting Force Coefficients in Micro Drilling with Tool Edge Radius Effects
- Shape Optimization for Weight Reduction of Polymer Extrusion Die
- Interaction of Composite Brazing Alloy Sn-Cu-Co-W with Diamond at Brazing of Diamond Abrasive Tools
- Modeling Methodology of Flexible Milling Force for Thin-Walled Component on High Speed Peripheral Milling Processing System
- Numerical Simulating and Analysis of Highly Nonlinear Penetration Problem in Hedge Trimmer
- Influence of Cutting Parameters on Energy Consumption and Material Removal Rate in Turning Process
- Diffusion Phenomena in the Combined Electric Diamond Grinding
- Experimental Investigation of Effects of Machining Parameters on Surface Roughness and Chip Formation of Aluminum Alloys by Face Turning.
- Intensification of Compaction and Hardening of Iron Powder Parts and Powder Steels at the Stage of Cold Molding before Sintering
- Intelligent Prediction of Tool Wear in Ball-End Milling Process Based on Dimensionless Cutting Force Ratio
- Electropolishing Parameters for Nickel Coating Replacement of Hard Disk Actuator Arm
- Monitoring of Surface Roughness Based on Cutting Force and Cutting Temperature in Ball-End Milling Process by Utilizing Response Surface Analysis
- Study of Support Structure in Solid Based Rapid Prototyping Technique
- FDM Approach
- A Novel Dovetail Joining Method for Planar Panels with Non-Orthogonal Cut Surfaces
- Experimental Analysis of Machining Parameters in WEDM of AISI D3 Steel Using Taguchi Method
- Ion Nitriding of Gears with Hollow Cathode Effect
- Study of Simple Method for Extraction of Optimum Cutting Fluids in Incoloy 825 Reaming
- Effect of Cutting Parameters on Cutting Forces for Different Profile of Cutting
- A Study of Relation between Roundness and Cutting Force in CNC Turning Process
- Application of Evolution Algorithms to Aluminium Alloy Casting Porosity Prediction Function
- Effect of Post Weld Heat Treatment on Weld Hardness Quality of P91 Welded Pipes
- Power Skiving Process for Cylindrical Gears Manufacturing
- Optimization of EDM Process with Magnetic Field Using Grey Relational Analysis Coupled with Principal Component Analysis
- Minimization of Ovality of Circular Holes in Drilling Process
- Improvement Corrosion Resistance of Gray Cast Iron Grade FC220 on Chromizing Process by Separate Cr Powder and NH4Cl Powder System
- A Feasibility Study of Roll to Roll Printing on Graphene
- Elimination of Clogging in PMMA Microchannels Using Water Assisted CO2 Laser Micromachining.
- Effects of Polishing Direction on the Adhesion Behaviour of Thermal Oxide Scales on AISI 441 Stainless Steel Measured by a Tensile Test
- Producing of Tix-Aly Intermetallic Coatings on the Surface of Pre-Nitriding Punching Tools
- Surface Roughness and Part Dimensional Accuracy after Deposition of Coating by Vacuum Arc Plasma
- Residual Stress Predictive Model of TIG Welding Process Using Finite Element Analysis
- Study the Role of Friction Stir Welding Tilt Angle on Microstructure and Hardness
- Analysis of Flexible Roll Forming Process with Arc Shape Panel
- Theoretical Investigations and Simulation of the Hydroforming Processes Performed on C1010 Low Carbon Steel Tubes
- Effect of Si Content on Thermal Stability of CrAl(Si)N Coatings
- Study on Automatic Pulling Equipment of Radius Fillers
- Consideration of Femtosecond Laser-Induced Effect on Semiconductor Material SiC Substrate for CMP Processing
- Performance Evaluation of a Paraboloidal Concentrator
- Chapter 4: Materials and Technologies in Biomedicine
- Bio-Functionalization of Carbon Nanotubes and Intracellular Imaging
- Functional Chain Transfer Agent and its Application in Block Polymer Synthesis
- Novel Method of Developing Nanosilica Coated Alumina Micro Abrasives Using Silicon Nanoparticles Generated from Spark Erosion as the Source
- Study of Different Biomaterials for Artificial Lumbar Disc Prosthesis Using FEM
- Effects of Fibroin Treatments on Physical and Biological Properties of Chitosan/Hydroxyapatite/Fibroin Bone's Scaffold
- FTIR Study on the Preliminary Development of Synthesis Methods for Hydroxyapatite Modified Silica Aerogel
- Optimal Conditions for Aqueous Tape Casting of Hydroxyapatite
- Eliminating of Far Pedicle Cortex Perforation by Automatic Spine Drilling
- In Vitro Experimental and Numerical Analysis of Forces in Plane Cutting of Cortical Bone.