Materials, industrial, and manufacturing engineering research advances 2 /
Clasificación: | Libro Electrónico |
---|---|
Autor Corporativo: | |
Otros Autores: | , |
Formato: | Electrónico Congresos, conferencias eBook |
Idioma: | Inglés |
Publicado: |
[Pfaffikon], Switzerland :
Trans Tech Publications,
[2015]
|
Colección: | Advanced materials research ;
v. 1125. |
Temas: | |
Acceso en línea: | Texto completo |
Tabla de Contenidos:
- Intro
- Materials, Industrial, and Manufacturing Engineering Research Advances 2
- Preface
- Table of Contents
- Chapter 1: Materials Engineering, Chemical Technologies and Materials Processing
- An Introduction to Lightweight, Energy Saving, Environment Friendly Magnesium Based Nanocomposites: Materials of Upcoming Generation
- Comparison of Three-Parameter Weibull Statistical Analysis of the Flexural Strength of Dense and Porous Sintered Clay
- Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline
- TGO Formation with NiCoCrAlYTa Bond Coat Deposition Using APS and HVOF Method
- Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite
- Oxidation of Pure Aluminium Granules during In Situ Melting
- Effect of Silver Nanoparticles in Silicalite-1 Zeolite on Antireflection and Antibacterial Performances
- Improvement of Hydrophilic Stability of Diamond-Like Carbon Films by O2/CF4 Plasma Post-Treatment
- An Improvement of Photoanode Performance for Enhanced Efficiency in Dye-Sensitized Solar Cell
- Effect of Ingredient Loading on Vulcanization Characteristics of a Natural Rubber Compound
- Effect of Ingredient Loading on Water Transport Properties of a Vulcanized Natural Rubber Compound
- Effects of Electron Beam on Structure and Physical Properties of Natural Colorless Topaz
- Effect of Ingredient Loading on Surface Migration of Additives in a Surfactant-Loaded Natural Rubber Vulcanizate
- Characterisation of Moisture Absorption Effects on the Strength of Composite Materials
- Modeling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites
- Effect of the Gel Coat Composition on the Tensile Strength for Glass Fibre Reinforced Polyester Composites
- UV LED Curing Formulation for Polyacrylamide Hydrogels.
- A Study on Post Weld Heat Treatment of Friction Stir Welded Al2195 Blank for Spin Forming
- Mechanical Properties of Shielded Metal Arc Welded Low Carbon Steel: Effect of Butt Joint Type and Uncapping of Excess Weldment
- Effects of Salinity on Nanosilica Applications in Altering Limestone Rock Wettability for Enhanced Oil Recovery
- The Effectiveness of Cationic and Polymer Inhibitors on Shale
- Improved Coefficient of Friction Using Different Types of Lubricants in Drilling Operation
- Chapter 2: Materials and Technologies in Environmental Engineering, Bio- and Green Production
- Cellulose Nanowhiskers Reinforced Green Nanocomposites: Some Recent Development
- Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid)
- Mechanical Behavior of Composite Multilayered Basalt/E-Glass/Epoxy Pipe under Internal Pressure
- Effect of Colorant on Tensile Strength and Carbonyl Index of Oxo-Biodegradable Low-Density Polyethylene Films during Thermal Aging
- Sorption Kinetics of Pro-Oxidant-Loaded PE Plastic Bags in Aqueous Media
- Effect of Filter Aids on Pressure Drop and Permeability of Two Different Filter Media
- Novel Hydrophilic Chitosan and Sago Based Membranes for Pervaporation of Organic-Water Mixtures
- Highly Response and Sensitive Copper Sensors Based on Chitosan Films
- Overview on Mechanical-Chemical Ionic Liquid Pretreatment Study on Bioethanol-Based Lignocellulosics Biomass
- Characterization of Nanosilica of Tapioca Peel as Adsorbent for Biomethane Storage System
- Tensile and Morphological Properties of Hybrid Montmorillonite/Microcrystalline Cellulose Filled Polylactic Acid Composites: Effect of Filler Ratio
- Effects of Pre-Treatment Conditions on Black Tilapia Fish Scales for Gelatin Extraction.
- Biopolymeric Adsorbent for the Removal of Methylene Blue: Characterizations, Equilibrium Isotherms and Kinetic Studies
- Effect of Solvent on Adhesion Property of Glass Fiber Recycled by Superheated Steam
- Recycling Technique of Carbon Fiber Laminate Using Hydrolysis Near Critical Region
- Preparation of Cellulose Nanocrystal Aerogel from Wastepaper through Freeze-Drying Technique
- Effect of Fluidization Number on the Combustion of Empty Fruit Bunch in a Fluidized Bed
- Determination of Volatile Organic Compounds (VOCs) at Selected Pump Stations in Skudai, Johor Bahru
- Carbon Dioxide Removal by Using Absorption Process with 5M Aqueous Solution of 2-(Methylamino)Ethanol
- A Theoretical Performance of MR-DeDuster as a Fine Dust Emission Control System
- Particulate Emission from Biomass Fuel Combustion
- An Investigation of Carbon Dioxide Sequestration on Amine-Modified Kenaf: Adsorption Isotherm Study
- Compatibility Issue Related to the Use of Biodiesel with Automotive Materials
- Microwave Assisted Pyrolysis of Rice Husk in the Presence of Eco Friendly Microwave Absorber in Producing Bio-Oil
- Chapter 3: Materials and Technologies in Construction
- Cathodic Protection Effect of Reinforced Concrete Beam Specimens with Zinc Sacrificial Anode in Marine Environment
- The Experimental Measurement on the Throwing Power of Sacrificial Anode Cathodic Protection for Concrete Piles in Natural Sea Water
- Assessment of the Elastic Stress of 304 Stainless Steel Using Half-Cell Potential Measurement
- Influence of Ion Irradiated Recycled Polyethylene on Physical Properties of Bituminous Binder
- Utilization of Variable Resistor for Improvement of Impressed Current Cathodic Protection System on Reinforced Concrete Structures
- Fresh Properties of Self-Compacting Concrete Integrating Coal Bottom Ash as a Replacement of Fine Aggregates.
- Effect of External Environment on the Properties of Selected Plasters
- Determination of Salt Transport Properties of Sandstone: A Combined Experimental/Computational Approach
- A Study on the Structural Analysis of Jacket Substructure Related to Offshore Wind Power Environment
- Chapter 4: Materials and Technologies for Biomedical Application
- Surface Characterization of Biomimetic Hydroxyapatite-Silver Functionalized on Polydopamine Film
- Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Ceria-Zirconia Prepared by Colloidal Process
- New Solvent System for the Fabrication of Polyvinyl Alcohol
- Gelatin Nanofibers via Electrospinning
- Composite of Poly Lactid Co-Glycolic Acid (PLGA)-Collagen Coated by Chitosan as Candidate of Hollow Fiber Small Diameter Vascular Graft
- Investigation of Gamma Radiation on Hydroxyapatite Synthesized from Chicken Eggshell by ESR Spectroscopy
- Preparation and Characteristic of Hydroxyapatite Synthesized from Cuttlefish Bone by Precipitation Method
- The Effect of Silane on the Biomechanical Properties of PEEK/HA Composite
- Design of Above-Knee Prosthesis: A Finite Element Stress Analysis
- Porous Magnesium Scaffolds for Bone Implant Applications: A Review
- Effects of Alkaline Treatment on Corrosion Behavior of Biodegradable Magnesium
- Effect of Heat Treatment on Surface Morphology of Titanium
- Characterisation and In Vitro Bioactivity of UV-Treated Anodised Titanium
- Anodic Oxidation of Titanium in Acetic Acid for Biomedical Application
- Effect of UV Light Treatment Condition on Apatite Formation of Anodised Titanium
- Effect of UV Wavelength on Apatite Formation of Anodised Titanium
- Analysis on Compressibility of Dental Amalgam Using Nanomaterial Zinc Oxide (ZnO)
- Effect of Calcination on the Properties of Hydroxyapatite from Tilapia Fish Bones.