Cargando…
Recent trends in materials, mechanical engineering, automation and information engineering : selected, peer reviewed papers from the 2014 3rd International Conference on Recent Trends in Materials and Mechanical Engineering, (ICRTMME 2015), January 15-16, 2015, Auckland, New Zealand /
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Recent Trends in Materials and Mechanical Engineering, (ICRTMME 2015), January 15-16, 2015, Auckland, New Zealand. The 36 papers are grouped as follows: Chapter 1: Materials Science and Materials Processing Te...
| Clasificación: | Libro Electrónico |
|---|---|
| Autor Corporativo: | |
| Otros Autores: | , |
| Formato: | Electrónico Congresos, conferencias eBook |
| Idioma: | Inglés |
| Publicado: |
Pfäffikon, Zurich, Switzerland :
Trans Tech Publications,
2015.
|
| Colección: | Applied mechanics and materials ;
v. 736. |
| Temas: | |
| Acceso en línea: | Texto completo |
MARC
| LEADER | 00000cam a2200000 i 4500 | ||
|---|---|---|---|
| 001 | EBSCO_ocn905855873 | ||
| 003 | OCoLC | ||
| 005 | 20231017213018.0 | ||
| 006 | m o d | ||
| 007 | cr cn||||||||| | ||
| 008 | 150320t20152015sz ao ob 101 0 eng d | ||
| 040 | |a E7B |b eng |e rda |e pn |c E7B |d CUS |d EBLCP |d DEBSZ |d OCLCO |d OCLCF |d OCLCO |d YDXCP |d N$T |d OCLCO |d IDB |d AGLDB |d OCLCQ |d ICA |d MOR |d PIFAG |d ZCU |d MERUC |d OCLCQ |d U3W |d D6H |d STF |d VTS |d ICG |d INT |d VT2 |d OCLCQ |d TKN |d OCLCQ |d DKC |d AU@ |d OCLCQ |d M8D |d OCLCQ |d TTECH |d AJS |d OCLCO |d QGK |d OCLCQ |d OCLCO | ||
| 066 | |c (N | ||
| 019 | |a 905984791 |a 959872002 |a 1259213572 | ||
| 020 | |a 9783038268031 |q (electronic bk.) | ||
| 020 | |a 3038268038 |q (electronic bk.) | ||
| 020 | |z 9783038354178 | ||
| 029 | 1 | |a CHBIS |b 010436975 | |
| 029 | 1 | |a CHVBK |b 333832213 | |
| 029 | 1 | |a DEBBG |b BV044073628 | |
| 029 | 1 | |a DEBSZ |b 432125531 | |
| 029 | 1 | |a DEBSZ |b 484741306 | |
| 029 | 1 | |a NZ1 |b 16242843 | |
| 035 | |a (OCoLC)905855873 |z (OCoLC)905984791 |z (OCoLC)959872002 |z (OCoLC)1259213572 | ||
| 050 | 4 | |a TJ5 |b .I584 2015eb | |
| 072 | 7 | |a TEC |x 009070 |2 bisacsh | |
| 082 | 0 | 4 | |a 621 |2 23 |
| 049 | |a UAMI | ||
| 111 | 2 | |a International Conference on Recent Trends in Materials and Mechanical Engineering |n (3rd : |d 2015 : |c Auckland, N.Z.) | |
| 245 | 1 | 0 | |a Recent trends in materials, mechanical engineering, automation and information engineering : |b selected, peer reviewed papers from the 2014 3rd International Conference on Recent Trends in Materials and Mechanical Engineering, (ICRTMME 2015), January 15-16, 2015, Auckland, New Zealand / |c edited by Khanittha Wongseedakaew and Qi Luo. |
| 264 | 1 | |a Pfäffikon, Zurich, Switzerland : |b Trans Tech Publications, |c 2015. | |
| 264 | 4 | |c ©2015 | |
| 300 | |a 1 online resource (236 pages) : |b illustrations (some color), graphs, photographs | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 490 | 1 | |a Applied Mechanics and Materials, |x 1662-7482 ; |v Volume 736 | |
| 504 | |a Includes bibliographical references and indexes. | ||
| 588 | 0 | |a Online resource; title from PDF title page (ebrary, viewed March 20, 2015). | |
| 505 | 0 | |6 880-01 |a Recent Trends in Materials, Mechanical Engineering, Automation and Information Engineering; Preface and Organization Committee; Table of Contents; Chapter 1: Materials Science and Materials Processing Technology, Materials Mechanical Properties; A Study on Precipitation Kinetics of an Al-Cu-Li Alloy; The Effect of Elastic Deformation on the Load-Carrying Capacity of Textured Sliding Surfaces; Heat Combustion, Tensile Strength and Biodegradability of Recycled Polypropylene Modified Multifunctional Agent Composites in the Presence of Pineapple Leave Fiber and Bentonite. | |
| 505 | 8 | |a Grain Size Dependence of Tensile Properties in Cu-Sn Thin Foils (Experimental Study)Process Dependence of Microstructure and Mechanical Properties for Al-Fe Based Bulk Alloys; Naturally Twisted Layered Anisotropic Rod Made of Reinforced Materials Research; A Study of Palm Oil-Methanol Mixing in a Stirred Tank Equipped with a Fractal Baffles; Effect of Nano and Micro Particle Additives on Rough Surface TEHL with Non-Newtonian Lubricant; The Effects of SnO2 Doping on the Electrical Properties of ZnO Varistors; Rough Soft-EHL with Non-Newtonian Lubricant. | |
| 505 | 8 | |a Development of Titanium Based Biocompatible Materials with Controlled PorosityRemoval of Natural Dyes from Tie Dye Effluent by Coagulation Process; Analysis of Residual Stress Distribution in Anisotropic Thermo-Elastic Bimorph Systems; Formability Analysis of Steel Sheet by Use of Numerical Simulation; Chapter 2: Applied Mechanics, Advanced Materials Application in Manufacturing and Industry; Research on Pre-Load Treatment of Broadened Highway Subgrade; Modeling of Physical Subsystem Using an Example of Electromagnetic Exciter of Low-Frequency Oscillations. | |
| 505 | 8 | |a Study on Temperature Distribution in the Jointing Fittings for Polyethylene Natural Gas PipesA Study about Single-Photon Transport Controlled by Dipole-Dipole Interaction in a One-Dimensional Coupled Waveguide Cavity; A Study about Single-Photon Transport Controlled by the Three-Level Atom in the Optical Waveguide Cavity; Study on the Interaction Law between the Shape Parameters and Permanent-Magnetic Adhesive Force of Railway Permanent-Magnetic Track Brake Equipment. | |
| 520 | |a Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Recent Trends in Materials and Mechanical Engineering, (ICRTMME 2015), January 15-16, 2015, Auckland, New Zealand. The 36 papers are grouped as follows: Chapter 1: Materials Science and Materials Processing Technology, Materials Mechanical Properties; Chapter 2: Applied Mechanics, Advanced Materials Application in Manufacturing and Industry; Chapter 3: Information Technologies, Intelligent Control Systems; Chapter 4: Robotics, Automation and Control. | ||
| 546 | |a English. | ||
| 590 | |a eBooks on EBSCOhost |b EBSCO eBook Subscription Academic Collection - Worldwide | ||
| 650 | 0 | |a Mechanical engineering |v Congresses. | |
| 650 | 0 | |a Automation |v Congresses. | |
| 650 | 0 | |a Materials |v Congresses. | |
| 650 | 4 | |a Materials |v Congresses. | |
| 650 | 4 | |a Engineering. | |
| 650 | 4 | |a Mechanical engineering. | |
| 650 | 6 | |a Génie mécanique |v Congrès. | |
| 650 | 6 | |a Automatisation |v Congrès. | |
| 650 | 6 | |a Matériaux |v Congrès. | |
| 650 | 7 | |a TECHNOLOGY & ENGINEERING |x Mechanical. |2 bisacsh | |
| 650 | 7 | |a Automation |2 fast | |
| 650 | 7 | |a Materials |2 fast | |
| 650 | 7 | |a Mechanical engineering |2 fast | |
| 655 | 7 | |a Conference papers and proceedings |2 fast | |
| 700 | 1 | |a Wongseedakaew, Khanittha, |e editor. | |
| 700 | 1 | |a Luo, Qi, |e editor. | |
| 776 | 0 | 8 | |i Print version: |a International Conference on Recent Trends in Materials and Mechanical Engineering (3rd : 2015 : Auckland, New Zealand). |t Recent trends in materials, mechanical engineering, automation and information engineering : selected, peer reviewed papers from the 2014 3rd International Conference on Recent Trends in Materials and Mechanical Engineering, (ICRTMME 2015), January 15-16, 2015, Auckland, New Zealand. |d Pfäffikon, Zurich, Switzerland : Trans Tech Publications, ©2015 |h 233 pages |k Applied mechanics and materials ; Volume 736 |x 1662-7482 |z 9783038354178 |
| 830 | 0 | |a Applied mechanics and materials ; |v v. 736. | |
| 856 | 4 | 0 | |u https://ebsco.uam.elogim.com/login.aspx?direct=true&scope=site&db=nlebk&AN=961499 |z Texto completo |
| 880 | 8 | |6 505-01/(N |a Analysis of Convective Heat Transfer Coefficient on Shape Memory Alloy Actuatorunder Various Ambient Temperatures with Finite Difference MethodShape Synthesis for Skeletal Structures Using а Genetic Algorithm and Delaunay Tetrahedron Partition; Theoretical Investigation in an Artificial Hip Joint under Elastohydrodynamic Lubrication; Modification of Mechanisms from Database for Task Based Conceptual Design Method; Magnetic Field-Driven Manipulation System and its Applications in Micromixing and Microablation. | |
| 936 | |a BATCHLOAD | ||
| 938 | |a Trans Tech Publications, Ltd |b TRAN |n 10.4028/www.scientific.net/AMM.736 | ||
| 938 | |a ProQuest Ebook Central |b EBLB |n EBL1980781 | ||
| 938 | |a ebrary |b EBRY |n ebr11031166 | ||
| 938 | |a EBSCOhost |b EBSC |n 961499 | ||
| 938 | |a YBP Library Services |b YANK |n 12328353 | ||
| 994 | |a 92 |b IZTAP | ||