Cargando…
Proceedings of the 14th Symposium on Experimental Stress Analysis and Materials Testing : selected, peer reviewed papers from the 14th Symposium on Experimental Stress Analysis and Materials Testing with the Occasion of 90 Years of Strength of Materials Laboratory from POLITECHNICA University Timisoara May 23-25, 2013, Timisoara, Romania /
Collection of selected, peer reviewed papers from the 14th Symposium on Experimental Stress Analysis and Materials Testing with the occasion of 90 years of Strength of Materials Laboratory from POLITECHNICA University Timisoara, May 23-25, 2013, Timisoara, Romania. The 59 papers are grouped as follo...
| Clasificación: | Libro Electrónico |
|---|---|
| Autor Corporativo: | |
| Otros Autores: | |
| Formato: | Electrónico Congresos, conferencias eBook |
| Idioma: | Inglés |
| Publicado: |
Durnten-Zurich, Switzerland :
Trans Tech Publications,
2014.
|
| Colección: | Key engineering materials ;
v. 601. |
| Temas: | |
| Acceso en línea: | Texto completo |
MARC
| LEADER | 00000cam a2200000 i 4500 | ||
|---|---|---|---|
| 001 | EBSCO_ocn880458693 | ||
| 003 | OCoLC | ||
| 005 | 20231017213018.0 | ||
| 006 | m o d | ||
| 007 | cr cnu---unuuu | ||
| 008 | 140505t20142014sz a ob 101 0 eng d | ||
| 040 | |a E7B |b eng |e rda |e pn |c E7B |d N$T |d OCLCO |d UAB |d CUS |d EBLCP |d LLB |d DEBSZ |d OCLCQ |d OCLCO |d YDXCP |d OCLCF |d OCLCO |d AGLDB |d CCO |d PIFBY |d ZCU |d MERUC |d U3W |d STF |d OCLCQ |d VTS |d ICG |d INT |d VT2 |d OCLCQ |d WYU |d TKN |d OCLCQ |d DKC |d AU@ |d OCLCQ |d M8D |d OCLCQ |d HS0 |d OCL |d OCLCQ |d TTECH |d AJS |d OCLCO |d QGK |d OCLCQ |d OCLCO | ||
| 019 | |a 904239193 |a 907236459 |a 961651105 |a 962632958 |a 1055393198 |a 1066443801 |a 1081219126 |a 1142779270 |a 1228578759 |a 1259095126 | ||
| 020 | |a 9783038264293 |q (electronic bk.) | ||
| 020 | |a 3038264296 |q (electronic bk.) | ||
| 020 | |a 3038350486 | ||
| 020 | |a 9783038350484 | ||
| 020 | |z 9783038350484 | ||
| 029 | 1 | |a DEBBG |b BV043781229 | |
| 029 | 1 | |a DEBBG |b BV044072682 | |
| 029 | 1 | |a DEBSZ |b 431894027 | |
| 029 | 1 | |a DEBSZ |b 472826743 | |
| 035 | |a (OCoLC)880458693 |z (OCoLC)904239193 |z (OCoLC)907236459 |z (OCoLC)961651105 |z (OCoLC)962632958 |z (OCoLC)1055393198 |z (OCoLC)1066443801 |z (OCoLC)1081219126 |z (OCoLC)1142779270 |z (OCoLC)1228578759 |z (OCoLC)1259095126 | ||
| 050 | 4 | |a TA645 |b .P763 2014eb | |
| 072 | 7 | |a TEC |x 009020 |2 bisacsh | |
| 082 | 0 | 4 | |a 624.171 |2 23 |
| 049 | |a UAMI | ||
| 111 | 2 | |a Symposium on Experimental Stress Analysis and Materials Testing |n (14th : |d 2013 : |c Timișoara, Romania) | |
| 245 | 1 | 0 | |a Proceedings of the 14th Symposium on Experimental Stress Analysis and Materials Testing : |b selected, peer reviewed papers from the 14th Symposium on Experimental Stress Analysis and Materials Testing with the Occasion of 90 Years of Strength of Materials Laboratory from POLITECHNICA University Timisoara May 23-25, 2013, Timisoara, Romania / |c edited by Liviu Marsavina. |
| 264 | 1 | |a Durnten-Zurich, Switzerland : |b Trans Tech Publications, |c 2014. | |
| 264 | 4 | |c ©2014 | |
| 300 | |a 1 online resource (268 pages) : |b illustrations | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 490 | 1 | |a Key Engineering Materials, |x 1662-9795 ; |v Volume 601 | |
| 504 | |a Includes bibliographical references and indexes. | ||
| 588 | 0 | |a Online resource; title from PDF title page (ebrary, viewed May 2, 2014). | |
| 588 | 0 | |a Print version record. | |
| 520 | |a Collection of selected, peer reviewed papers from the 14th Symposium on Experimental Stress Analysis and Materials Testing with the occasion of 90 years of Strength of Materials Laboratory from POLITECHNICA University Timisoara, May 23-25, 2013, Timisoara, Romania. The 59 papers are grouped as follows: Chapter 1: Experimental Stress Analysis and Materials Testing, Chapter 2: Analytical and Numerical Stress Analysis, Chapter 3: Biomechanical Applications, Chapter 4: Civil Engineering Applications, Chapter 5: Mechanical Behavior of Cellular Materials. The 59 papers cover analytical and numerical stress analysis, biomechanical applications, civil engineering applications, and the mechanical behavior of cellular materials. The topics include the fatigue response of the hybrid joints obtained by hot spot welding and bonding techniques, the mathematical modeling of cracked pre-stressed elastic composite subjected to sliding force, calculating maximum tensile shear forces in restorative materials using finite element methods, a virtual geometric model of the human lower limb, and experimental case studies of compressive strength in clay fired bricks. -- Engineering-- Materials science-- Mechanical engineering. | ||
| 505 | 0 | |a Proceedings of the 14th Symposium on Experimental Stress Analysis and Materials Testing; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Experimental Stress Analysis and Materials Testing; Apparatus for Measuring Dynamic Bulk Compliance of Time-Dependant Materials; Novel Testing Device for the Experimental Stress Concentration Analysis of Multilayer Textile Composites under In-Plane Compressive Load; Cyclic Loading of Polyetheretherketone at High Tensile Stress Levels | |
| 505 | 8 | |a Considerations on the Necessity of Determining Principal Stresses and Directions for Analysis of Material Durability under Multiaxial FatigueSteels as Materials for Sonotrode Tools; Fatigue Response of the Hybrid Joints Obtained by Hot Spot Welding and Bonding Techniques; Flexural Properties of Polyamides: Influence of Strain Rate, Friction and Moulding-Induced Anisotropy; Measurement of Thermoplastics Tensile Proprieties Using Digital Image Correlation; Evaluation of the Thermally Sprayed Cermet Coatings Adhesion by Scratch Test | |
| 505 | 8 | |a Deflection Determination of V-Beam Thermal Sensors Using Digital Image CorrelationState of Stress Determination in a Water Drinker by Numerical and Experimental Methods; Mechanical Behaviour of Nickel Based Amorphous Alloys during Tensile Test at Different Strain Rates; Measurement and Analysis of Noise Generated in a Tram Rail Wheel Contact; A Comparison of Composite Bars against Metallic Bars from the Mass per Unit Length Point of View; Chapter 2: Analytical and Numerical Stress Analysis | |
| 505 | 8 | |a Effect of Exploitation Conditions and Flaw Geometry on the Load Carrying Capacity of Casing Pipes for Oil Drilling RigsEstimation of Thermal Stress Intensity Factor in a Strip with Various Property Gradations Subjected to Thermal Shock; Structural Solutions for Ship Hull Plates Strengthening, under Blast Loads; A Special Pipe Support Analysis; A Strength Calculation of a Nozzle Using Comparative Methods; Buckling Behaviour of the Delaminated Sandwich Plates under Combined Loads; Theoretical Meso-Model of Al2O3/ZrO2 Ceramic Response under Compression | |
| 505 | 8 | |a Cracked Pre-Stressed Elastic Composite Subjected by Sliding Forces I. Mathematical ModellingCreep Behaviour of a Thermoresistant Steel Working under Thermal Loads; Fatigue Calculation of a Car Component Subjected to Random Vibrations; Mathematical Aspects Regarding Cracks Behaviour in Wood Composites; Stress Analysis of Hyperbaric Chambers of Different Geometries; Stress and Displacements Analysis for Drilling Mast Elements Made of Rectangular Pipe under the Action of the Wind as a Hurricane | |
| 546 | |a English. | ||
| 590 | |a eBooks on EBSCOhost |b EBSCO eBook Subscription Academic Collection - Worldwide | ||
| 650 | 0 | |a Structural analysis (Engineering) |v Congresses. | |
| 650 | 0 | |a Strains and stresses |v Congresses. | |
| 650 | 0 | |a Materials |x Testing |v Congresses. | |
| 650 | 6 | |a Théorie des constructions |v Congrès. | |
| 650 | 6 | |a Contraintes (Mécanique) |v Congrès. | |
| 650 | 6 | |a Matériaux |x Essais |v Congrès. | |
| 650 | 7 | |a TECHNOLOGY & ENGINEERING |x Civil |x General. |2 bisacsh | |
| 650 | 7 | |a Materials |x Testing |2 fast | |
| 650 | 7 | |a Strains and stresses |2 fast | |
| 650 | 7 | |a Structural analysis (Engineering) |2 fast | |
| 655 | 7 | |a Conference papers and proceedings |2 fast | |
| 700 | 1 | |a Marsavina, Liviu, |e editor. | |
| 776 | 0 | 8 | |i Print version: |a Symposium on Experimental Stress Analysis and Materials Testing (14th : 2013 : Timișoara, Romania). |t Proceedings of the 14th Symposium on Experimental Stress Analysis and Materials Testing. |d Durnten-Zurich, Switzerland : Trans Tech Publications, [2014] |z 9783038350484 |w (OCoLC)884327156 |
| 830 | 0 | |a Key engineering materials ; |v v. 601. | |
| 856 | 4 | 0 | |u https://ebsco.uam.elogim.com/login.aspx?direct=true&scope=site&db=nlebk&AN=754173 |z Texto completo |
| 938 | |a EBL - Ebook Library |b EBLB |n EBL1910745 | ||
| 938 | |a ebrary |b EBRY |n ebr10861191 | ||
| 938 | |a EBSCOhost |b EBSC |n 754173 | ||
| 938 | |a Trans Tech Publications, Ltd |b TRAN |n 10.4028/www.scientific.net/KEM.601 | ||
| 938 | |a YBP Library Services |b YANK |n 11762916 | ||
| 994 | |a 92 |b IZTAP | ||