Cargando…
Heat exchanger design guide : a practical guide for planning, selecting and designing of shell and tube exchangers /
| Clasificación: | Libro Electrónico |
|---|---|
| Autores principales: | , |
| Formato: | Electrónico eBook |
| Idioma: | Inglés |
| Publicado: |
Kidlington, Oxford, UK :
Butterworth Heinemann/Elsevier,
[2016]
|
| Temas: | |
| Acceso en línea: | Texto completo |
Tabla de Contenidos:
- Front Cover; HEAT EXCHANGER DESIGN GUIDE; Copyright; CONTENTS; FOREWORD; 1
- Heat Exchanger Design; 1.1 PROCEDURE IN HEAT EXCHANGER DESIGN; 1.2 INFORMATION ABOUT HEAT EXCHANGERS; 1.2.1 Tube Pattern; 1.2.2 Bypass and Leakage Streams; 1.2.3 Baffles; 1.2.4 Technical Remarks; 1.2.5 Selection of a Shell and Tube Exchanger; 1.2.5.1 Which Heat Exchanger Types Can Be Cleaned?; NOMENCLATURE; REFERENCES; 2
- Calculations of the Temperature Differences LMTD and CMTD; 2.1 LOGARITHMIC MEAN TEMPERATURE DIFFERENCE FOR IDEAL COUNTERCURRENT FLOW
- 2.2 CORRECTED TEMPERATURE DIFFERENCE FOR MULTIPASS HEAT EXCHANGER2.3 INFLUENCE OF BYPASS STREAMS ON LMTD; 2.4 MEAN WEIGHTED TEMPERATURE DIFFERENCE; 2.5 DETERMINATION OF THE HEAT EXCHANGER OUTLET TEMPERATURES; 2.5.1 Calculation of the outlet temperatures in a multipass heat exchanger under consideration of the temperature efficiency fact ... ; 2.5.1.1 Calculation of the outlet temperature Tc2 of the cold medium; 2.5.2 Calculation of the outlet temperature th2 for ideal countercurrent without F; REFERENCES AND FURTHER READING
- 4.2.2 Number of tubes per pass tP for a given flow velocity wT4.2.3 Required number of tubes per pass tP for a given Reynolds number Re; 4.2.4 Required flow velocity wT for a given Reynolds number Re; 4.3 SHELL-SIDE CALCULATIONS (FIGURE 4.2); 4.3.1 Flow cross section across for the flow across the tubes (Figure 4.2); 4.3.2 Flow cross section aw for the longitudinal flow in the baffle cuts; 4.3.3 Average flow cross section aav on the shell side; 4.3.4 Shell-side flow velocities wav; 4.3.5 Required baffle spacing B for a given cross stream velocity wcross