Formulas and calculations for drilling, production, and workover : all the formulas you need to solve drilling and production problems /

Mostrar otras versiones (2)
Detalles Bibliográficos
Clasificación:Libro Electrónico
Autores principales: Lyons, William C. (Autor), Carter, Tom, 1943- (Autor), Lapeyrouse, Norton J. (Autor)
Otros Autores: Carter, Thomas
Formato: Electrónico eBook
Idioma:Inglés
Publicado: Waltham, MA : Gulf Professional Publishing, an imprint of Elsevier, [2016]
Edición:Fourth edition.
Temas:
Oil wells > Management > Mathematics.
Oil wells > Management > Handbooks, manuals, etc.
Mining engineering.
Catalytic cracking.
Craquage catalytique.
Pétrole > Puits > Gestion > Mathématiques.
Pétrole > Puits > Gestion > Guides, manuels, etc.
Technique minière.
TECHNOLOGY & ENGINEERING > Mining.
Catalytic cracking
Mining engineering
Oil wells > Management
handbooks.
manuals (instructional materials)
Handbooks and manuals
Handbooks and manuals.
Guides et manuels.
Acceso en línea:Texto completo
Tabla de Contenidos:
  • 1.6. Pressure Gradient (psi/ft.), G (ppg) [USCS/British]1.7. Pressure Gradient G (SG) [SI-Metric]
  • 1.8. Mud Pump Output q (bbl/stk) and Q (gpm) [USCS/British]
  • 1.8.1. Triplex Pump
  • 1.8.2. Duplex Pump
  • 1.9. Hydraulic Horsepower
  • 1.10. Estimated Weight of Drill Collars in Air
  • 1.11. Open Hole and Tubular Capacity and Displacement Formulas
  • 1.11.1. Capacity of Open Hole or Tubulars
  • 1.11.2. Displacement of Tubulars
  • 1.11.3. Annular Capacity Between Casing or Hole and Drill Pipe, Tubing, or Casing
  • 1.11.4. Annular Capacity Between Casing and Multiple Strings of Tubing1.12. Amount of Cuttings Drilled per Foot of Hole Drilled
  • 1.13. Annular Velocity (AV)
  • 1.13.1. Metric Calculations (m/min) and (m/s)
  • 1.13.2. SI Unit Calculations
  • 1.14. Pump Output Required in GPM for a Desired Annular Velocity, ft./min
  • 1.15. Pump Pressure/Pump Stroke Relationship (the Roughnecks Formula)
  • 1.15.1. Metric Calculation
  • 1.15.2. SI Unit Calculation
  • 1.16. Buoyancy Factor (BF)
  • 1.17. Formation Temperature (Tf)
  • 1.18. Temperature Conversion Formulas
  • Chapter 2: Rig Calculations2.1. Accumulator Capacity
  • 2.1.1. Useable Volume per Bottle
  • 2.1.2. Surface Application
  • 2.1.3. English Units
  • 2.1.4. Deepwater Applications
  • 2.1.5. Accumulator Precharge Pressure
  • 2.2. Slug Calculations
  • 2.2.1. Barrels of Slug Required for a Desired Length of Dry Pipe
  • 2.2.2. Weight of Slug Required for a Desired Length of Dry Pipe with a Set Volume of Slug
  • 2.2.3. Volume, Height, and Pressure Gained Because of Placement of Slug in Drill Pipe
  • 2.2.4. English Units Calculation
  • 2.2.5. SI Calculation
  • 2.3. Bulk Density of Cutting Using the Mud Balance2.4. Drill String Design
  • 2.4.1. Estimated Weight of Drill Collars in Air
  • 2.4.2. Tensile Strength of Tubulars in lb (Ref.: API Spec 5D & 7)
  • 2.4.3. Calculate the Reduced Tensile Yield Strength in lb
  • 2.4.4. Calculate the Adjusted Weight of the Drill Pipe and Tool Joints in lb/ft
  • 2.4.5. Calculate the Length of BHA Necessary for a Desired Weight on the Bit
  • 2.4.6. Calculate the Maximum Length of Premium Drill Pipe That Can Be Run into the Hole with a Specific BHA Assemble Base ...

Ejemplares similares