Cargando…

Design of fastenings for use in concrete : the CEN/TS 1992-4 provisions /

The European standard draft CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels, mechanical and chemical anchors is ready for use. This book elivers a detailed description of the determination of tension and shear load actions. Furthermore plastic load capacity desig...

Descripción completa

Detalles Bibliográficos
Clasificación:Libro Electrónico
Autor principal: Mallée, Rainer
Otros Autores: Fuchs, Werner (Engineer), Eligehausen, Rolf, Bergmeister, Konrad, Fingerloos, Frank, Wörner, Johann Dietrich
Formato: Electrónico eBook
Idioma:Inglés
Alemán
Publicado: Weinheim : Chichester : Wiley-VCH ; John Wiley [distributor], 2013.
Colección:Beton-Kalender series.
Temas:
Acceso en línea:Texto completo

MARC

LEADER 00000cam a2200000 a 4500
001 EBOOKCENTRAL_ocn842963531
003 OCoLC
005 20240329122006.0
006 m o d
007 cr cnu---unuuu
008 130514s2013 gw ob 001 0 eng d
040 |a N$T  |b eng  |e pn  |c N$T  |d DG1  |d CUS  |d YDXCP  |d OHI  |d OCLCF  |d DEBSZ  |d MEAUC  |d OCLCQ  |d EBLCP  |d DG1  |d LIP  |d ZCU  |d MERUC  |d OCLCQ  |d ICG  |d INT  |d VT2  |d OCLCQ  |d WYU  |d U3W  |d OCLCQ  |d DKC  |d OCLCQ  |d OCLCO  |d OCLCQ  |d OCLCO  |d OCLCL  |d OCLCQ 
016 7 |a 016206181  |2 Uk 
019 |a 857939495  |a 1055368409  |a 1066592042  |a 1081277570 
020 |a 9783433602737  |q (electronic bk.) 
020 |a 3433602735  |q (electronic bk.) 
020 |a 9783433602706  |q (electronic bk.) 
020 |a 3433602700  |q (electronic bk.) 
020 |a 9783433602713 
020 |a 3433602719 
020 |a 9783433602720 
020 |a 3433602727 
020 |z 9783433030448 
020 |z 3433030448 
029 1 |a AU@  |b 000051629096 
029 1 |a CHBIS  |b 010441908 
029 1 |a CHNEW  |b 000941812 
029 1 |a CHVBK  |b 480220905 
029 1 |a DEBBG  |b BV044174874 
029 1 |a DEBSZ  |b 431406006 
029 1 |a DEBSZ  |b 485037173 
029 1 |a NZ1  |b 15028013 
029 1 |a NZ1  |b 15341911 
035 |a (OCoLC)842963531  |z (OCoLC)857939495  |z (OCoLC)1055368409  |z (OCoLC)1066592042  |z (OCoLC)1081277570 
041 1 |a eng  |h ger 
050 4 |a TA681 
072 7 |a TEC  |x 063000  |2 bisacsh 
082 0 4 |a 624.1834  |2 23 
049 |a UAMI 
100 1 |a Mallée, Rainer. 
245 1 0 |a Design of fastenings for use in concrete :  |b the CEN/TS 1992-4 provisions /  |c Rainer Mallee, Werner Fuchs, Rolf Eligehausen ; edited by Konrad Bergmeister, Frank Fingerloos, Johann-Dietrich Worner. 
260 |a Weinheim :  |b Wiley-VCH ;  |a Chichester :  |b John Wiley [distributor],  |c 2013. 
300 |a 1 online resource (158 pages) 
336 |a text  |b txt  |2 rdacontent 
337 |a computer  |b c  |2 rdamedia 
338 |a online resource  |b cr  |2 rdacarrier 
490 1 |a Beton-Kalender Series 
500 |a "The original German text is published in Beton-Kalender 2012 (ISBN 978-3-433-02989-3) and titles: Bemessung von Verankerung in Beton nach CEN/TS 1992-4"--Title page verso. 
546 |a Translated from the German. 
588 0 |a Print version record. 
505 0 |a Design of Fastenings for Use in Concrete -- the CEN/TS 1992-4 Provisions; Contents; Editorial; 1 Introduction; 2 Fields of application; 3 Basis of design; 3.1 General; 3.2 Verifications; 3.3 Partial factors; 3.3.1 General; 3.3.2 Actions; 3.3.3 Resistance; 3.3.3.1 Ultimate limit state; 3.3.3.2 Serviceability limit state; 4 Derivation of forces acting on fasteners; 4.1 General; 4.2 Tension loads; 4.2.1 Tension loads on fastenings with post-installed fasteners and headed fasteners; 4.2.2 Tension loads on fastenings with anchor channels; 4.3 Shear loads. 
505 8 |a 4.3.1 Shear loads on fastenings with post-installed and headed fasteners4.3.2 Shear loads on fastenings with anchor channels; 4.4 Tension forces in a supplementary reinforcement; 5 Verification of ultimate limit state by elastic analysis for post-installed fasteners (mechanical systems); 5.1 General; 5.2 Tension load; 5.2.1 Required verifications; 5.2.2 Steel failure; 5.2.3 Pull-out/pull-through failure; 5.2.4 Conical concrete break-out failure; 5.2.4.1 Characteristic resistance of a single fastener; 5.2.4.2 Effect of spacing and edge distance. 
505 8 |a 5.2.4.3 Effect of heavy surface reinforcement (shell spalling)5.2.4.4 Effect of the eccentricity of the load; 5.2.4.5 Special cases: three or four edges with ci <ccr, n; 5.2.5 Splitting; 5.2.5.1 Splitting failure during installation of post-installed fasteners; 5.2.5.2 Splitting failure of loaded post-installed fasteners; 5.3 Shear load; 5.3.1 Required verifications; 5.3.2 Steel failure without lever arm; 5.3.3 Steel failure with lever arm; 5.3.4 Pry-out failure; 5.3.5 Concrete edge failure; 5.3.5.1 Characteristic resistance of a single fastener; 5.3.5.2 Effect of spacing. 
505 8 |a 5.3.5.3 Effect of edge distances parallel to the load direction5.3.5.4 Effect of member thickness; 5.3.5.5 Effect of the eccentricity of the load; 5.3.5.6 Effect of load direction; 5.3.5.7 Effect of the position of the fastening; 5.3.5.8 Special case: narrow thin member; 5.4 Combined tension and shear load; 5.4.1 Steel failure decisive for tension and shear load; 5.4.2 Other modes of failure decisive; 6 Verification of post-installed fasteners (chemical systems) for the ultimate limit state based on the theory of elasticity; 6.1 General; 6.2 Tension load; 6.2.1 Required verifications. 
505 8 |a 6.2.2 Steel failure6.2.3 Combined pull-out and concrete failure; 6.2.3.1 Characteristic resistance of a single fastener; 6.2.3.2 Edge distance and spacing; 6.2.3.3 Effect of closely spaced fasteners; 6.2.3.4 Effect of heavy reinforcement (shell spalling); 6.2.3.5 Effect of the eccentricity of the load; 6.2.3.6 Special case: three or four edges with ci <ccr, Np; 6.2.4 Concrete cone failure; 6.2.5 Splitting; 6.3 Shear load; 6.3.1 Required verifications; 6.3.2 Steel failure due to shear load without and with lever arm; 6.3.3 Concrete pry-out; 6.3.4 Concrete edge failure. 
520 |a The European standard draft CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels, mechanical and chemical anchors is ready for use. This book elivers a detailed description of the determination of tension and shear load actions. Furthermore plastic load capacity design and a plastic design approach are given. Durability, fire resistance and earthquake action are exposed to a particular treatment. Selected chapters of the German concrete yearbook ""Beton-Kalender"" are now available in English. The new English BetonKalender Series delivers internationally. 
504 |a Includes bibliographical references (pages 147-151) and index. 
590 |a ProQuest Ebook Central  |b Ebook Central Academic Complete 
650 0 |a Concrete construction. 
650 0 |a Anchorage (Structural engineering) 
650 0 |a Fasteners  |x Design. 
650 6 |a Construction en béton. 
650 6 |a Ancrage (Construction) 
650 7 |a TECHNOLOGY & ENGINEERING  |x Structural.  |2 bisacsh 
650 7 |a Anchorage (Structural engineering)  |2 fast 
650 7 |a Concrete construction  |2 fast 
650 7 |a Fasteners  |x Design  |2 fast 
700 1 |a Fuchs, Werner  |c (Engineer)  |1 https://id.oclc.org/worldcat/entity/E39PCjBmqFpqChP7BrHWVVh3pP 
700 1 |a Eligehausen, Rolf. 
700 1 |a Bergmeister, Konrad. 
700 1 |a Fingerloos, Frank. 
700 1 |a Wörner, Johann Dietrich. 
758 |i has work:  |a Design of fastenings for use in concrete (Text)  |1 https://id.oclc.org/worldcat/entity/E39PCH3TGVYCKW9Dwb9dBdJGVC  |4 https://id.oclc.org/worldcat/ontology/hasWork 
776 0 8 |i Print version:  |a Mallee, Rainer.  |t Design of fastenings for use in concrete.  |d Weinheim : Wiley-VCH ; Chichester : John Wiley [distributor], 2013  |z 9783433030448  |w (OCoLC)817267972 
830 0 |a Beton-Kalender series. 
856 4 0 |u https://ebookcentral.uam.elogim.com/lib/uam-ebooks/detail.action?docID=1181437  |z Texto completo 
938 |a EBL - Ebook Library  |b EBLB  |n EBL4042149 
938 |a EBSCOhost  |b EBSC  |n 572608 
938 |a YBP Library Services  |b YANK  |n 10684715 
938 |a YBP Library Services  |b YANK  |n 10350822 
938 |a YBP Library Services  |b YANK  |n 12679281 
994 |a 92  |b IZTAP